|
Post by arteon on May 12, 2021 8:08:45 GMT
After running some applications I've got the following error: 4B Multifunction Module System description: FCM MQB Low Software number: 3Q0907338 Software version: 0286 Hardware number: 3Q0907338 Hardware version: 002 Serial number: 04061810521176 Faults: U12EB00 - Data bus front light Additional installations detected static U12EB00 - Data bus front light Additional installations detected static Long coding 000000050100044A01106F05020000000000000000000000000000000000 Module 4B Backup.txt (10.3 KB) Any Ideas?
|
|
|
Post by arteon on May 12, 2021 12:15:22 GMT
I changed te following adaptions:
Installation list, specified installations Multifunction Module Yes Multifunction module on the second bus connection Yes Light Control Left No --> Yes Light Control Right No --> Yes Light Control Left 2 No --> Yes Light Control Right 2 No --> Yes
Can some post there current config of a Arteon R-Line to see if there are other addaptions changed. The two errors are gone. The only think I have is that the the following modules showing orange in OBDeleven:
D6: Led Module Left
D7: Led Module Right
39: Light Control Right
29: Light Control Left
Anyone an idea how to resolve this?
|
|
|
Post by sjonnie1974 on Jun 8, 2021 21:21:04 GMT
Hi,
I also had an error in 4B module. I managed to reset this error, but now when i turn left or right and i use the fleshing lights, the 3rd breaklight also lights up. Any suggestion how to change this??
|
|
|
Post by arteon on Jun 19, 2021 15:40:32 GMT
Hi sjonnie1974, I had the same. I had to change the bold line: here's the way that the tweak should be coded: Leuchte22BR MA57 Lasttyp 22 > 42 - LED dritte Bremsleuchte Lampendefektbitposition 22 > 29 Fehlerort mittleres Byte DTC-DFCC 22 > 2C Lichtfunktion A 22 > Bremslicht Lichtfunktion B 22 > Aktive Blinkfunktion hat ein auf 1 gesetztes zugeordnetes Bit in pa_dynamisch_blinken --> Not AktivDimmwert AB 22 > 127 Lichtansteuerung HD AB 22 > Always Lichtfunktion C 22 > Blinken links Dunkelphase Lichtfunktion D 22 > Blinken rechts Dunkelphase Dimmwert CD 22 > 0 Dimming Direction CD 22 > minimize Lichtfunktion E 22 > Bremslicht Lichtfunktion F 22 > Rückfahrlicht Dimmwert EF 22 > 127 Dimming Direction EF 22 > maximize Lichtfunktion G 22 > nicht aktiv Lichtfunktion H 22 > nicht aktiv Dimmwert GH 22 > 0 Dimming Direction GH 22 > maximize Dyn. turn signal modes ZV_Blinken_zu > active ZV_Blinken_auf > active Warnblinken_Zuendung_EIN > active Warnblinken_Zuendung_AUS > active This fixed my problem with the 3rd brake light and my indicator. forum.obdeleven.com/thread/12414/third-brake-light-indicators
|
|
|
Post by ramazan on Jun 30, 2021 7:07:41 GMT
I changed te following adaptions: Installation list, specified installations Multifunction Module Yes Multifunction module on the second bus connection Yes Light Control Left No --> Yes Light Control Right No --> Yes Light Control Left 2 No --> Yes Light Control Right 2 No --> Yes Can some post there current config of a Arteon R-Line to see if there are other addaptions changed. The two errors are gone. The only think I have is that the the following modules showing orange in OBDeleven: D6: Led Module Left D7: Led Module Right 39: Light Control Right 29: Light Control Left Anyone an idea how to resolve this? I can make a full scan in the afternoon of my brothers Arteon and share the part of the scan you need.
|
|