|
Post by arteon on May 1, 2021 8:53:09 GMT
Situation: Activated Intersection Light with Route Data. Reverted back this setting after my first shock.
After doing basic settings (? -> Basic headlamp setting / Grundeinstellung der Scheinwerfer and after 30 seconds I selected "Acknowledge", "quittieren") everything seems to be working again.
The lights, active lighting and matrix thing is looking good at night (imho)
But: Multifunction Module 4B gives two same static errors which I can't delete:
Fehlercodes: U12EB00 - Datenbus Frontlicht - Mehrverbau erkannt statisch U12EB00 - Datenbus Frontlicht Mehrverbau erkannt statisch (Data bus front light - additional installations detected)
Fehlercodes: U12EB00 - Datenbus Frontlicht - Mehrverbau erkannt statisch U12EB00 - Datenbus Frontlicht Mehrverbau erkannt statisch (Data bus front light - additional installations detected)
Four of the ecus have a yellow status now in OBDeleven (but no errors):
Light Control Left / Lichtsteuerung links (29)
Light Control Left 2 / Lichtsteuerung links 2 (D6)
Light Control Right / Lichtsteuerung rechts (39)
Light Control Right 2 / Lichtsteuerung rechts 2 (D7)
If someone could give me a hint, that would be great....
|
|
|
Post by arteon on May 1, 2021 11:50:28 GMT
Also my Dynamic Blinkers at thwe back ar not functioning anymore?
|
|