Tell
New Member
Posts: 13
|
Post by Tell on Jan 18, 2017 1:02:17 GMT
No secret source was required to stop the start stop (SS) from triggering in. Reading around the subject the 12 volt one is now the preferred method as the amp one is less available on VW engines recently. I took the command from the top pinned list for the Golf Mk7 obdeleven.proboards.com/board/81/mk7Disable Start/Stop Select Control unit 19 Adaptation Start Stop Limit voltage Value=12 Made a note of what the previous voltage was for record, made the change and perfect. It doesn't throw up any annoying screens and no more damming and swearing with the DSG at turns and roundabouts as you forget to turn it off when you set off. 190 DSG we are talking about. No apps were involved. Easy to do.
|
|
|
Post by borislav on Jul 2, 2020 19:51:36 GMT
it does not work for the Ateka at the end of construction year 2019 Dezember, I tried it and so far I have not found a solution.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 3, 2020 8:20:58 GMT
I am afraid that in the MY20 vehicles VAG have disabled the ability to turn off the Stop Start switch in the old coded way.
As far as I am aware (and happy to be proved wrong) currently the only way is to fit a Stop Start memory module, this hardware remembers where the switch was last time ignition was on and resets it so you dont have to.
|
|