|
Post by master on Mar 23, 2021 8:07:48 GMT
Hello
Im facing issues reading values from eeprom.
Not sure what Im doing wrong ... the behavior is described in the post APP Tips below, but no solution
Pressing R after switching to service mode end with 7F ... "incorrect diagnostic session"
Thank you for ideas and help!
|
|
|
Post by philc43 on Dec 11, 2023 10:51:40 GMT
If you are having the same problem as the OP then you need to change the session to "developer mode". You should be able to read and write data then.
|
|