|
Post by jimmybond007 on Mar 19, 2021 8:40:19 GMT
Hello (again).
So baby steps and I have the option to enable light assist and the blue full beam with A is on the display. However it says light assist fault.
I have completed this part no problem:-
High Beam Assist STG09 Security access 31347 Adaptation FernlichtAssistent Menusterung Fernlichtassisten -> Present Menusterung Fernlichassisten werkseinstellung ->Present Erweiterte Fernlichtassisten -> AFS, FLA, Fernlicht uber AFS
However this part has both bit 0 and bit 5 enabled. I assume only bit 5 should be checked. Regardless when I uncheck bit 0 it says failed to programme
STG A5 Coding Byte 21 bit 5
On traffic light assist the steps start with
Control unit 5F (Information Control Unit) Adaptation Name: Car_Function_List_BAP_Gen2 Access Control: traffic_sign_recognition_0x21 Value = activated
My 5F is labelled multimedia and therefore under adaptation there is nothing called Car_Function_List_BAP_Gen2
Could someone please help with at least of my issues??
Thank you
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2021 13:33:12 GMT
What year is your car.
|
|
|
Post by jimmybond007 on Mar 29, 2021 13:39:25 GMT
Seat Terraco FR (UK model- 21 year build). I have successfully enabled light assist so that's good. However al the traffic sign recognition that shows these steps below does not work as 5F is called Multimedia and within that there is no Car_Function_List_BAP_Gen2. So perhaps it doesnt work on MY 21...?
On traffic light assist the steps start with
Control unit 5F (Information Control Unit) Adaptation Name: Car_Function_List_BAP_Gen2 Access Control: traffic_sign_recognition_0x21 Value = activated
My 5F is labelled multimedia and therefore under adaptation there is nothing called Car_Function_List_BAP_Gen2
Could someone please help with at least of my issues??
Thank you
|
|