|
Post by spielwurfel on Mar 15, 2021 22:26:54 GMT
Is OBDEleven able to pull some kind of car usage report, such as histograms of temoeratures, engine loads, RPM and etc.? I ask because I work with industrial diesel engines (quite different, I know), and for some of them I can pull these nice reports that tells me the history of how the engine was operated through time.
Also, I know it could depend from the car, but am I able to check for the DSG clutch wear level for my 2014 Golf 1.4 TSI?
Thanks!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 15, 2021 22:39:24 GMT
spielwurfel as far as I know (and we are all learning all the time) the app provides the following information 1/ Snapshot history - the main backup function will give you details of the control units and live data at a point in time. as far as i am aware it does not give access to a full history in the way you have described it 2/ Real time data - this you can record selected items from the live data either to view or to record into .csv file that can be exported for more detailed analysis but i stress this is just recording in real time it is not able to view what happend in the past. With regards to the DSG under live data there are (on the 2litre model which has the 6 speed dsg) Clutch 1 & 2 kiss point part 1 success counter Specified torque for clutch 1 & 2 Current of valve specified and actual on clutch 1 & 2 Clutch temp air/splash ol Pressur of clutch 1 & 2 actual value. Not sure if any of that means anything to you (The only one i use is temp) Hope that helps.
|
|
|
Post by spielwurfel on Mar 16, 2021 1:15:50 GMT
Thaks tester!
The info about the usage history you mentioned isn’t what I was really looking for but I was expecting for a negative answer.
About the DSG parameters, I’ll monitor them on my car and see if I can make any sense of them. Thanks!
|
|
|
Post by spielwurfel on Mar 16, 2021 21:31:03 GMT
Just as a comment, I found out some of those “analysis” parameters within some control units are referrent exaclty to what I was looking for (kind of).
Example, within the transmission control unit, I found that Analysis 81 to 87 and 89 to 96 are referrent to different temperature ranges for clutch 1 and 2 respectively, telling the time in seconds that each clutch was at each temperature range. The problem is that it says only Range 0 to 6 for each clutch, without telling what are those ranges. So finding them out would take some observation time, with a co-pilot......
It’s a progress already...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 16, 2021 21:46:30 GMT
I am not sure if the support guys can help but it may be worth a question to the support team via the in app help function to ask what the ranges for the different Analysis values.
Certainly on my car where i have Analysis there is a different description which may help.
Sorry I cant help more.
|
|
|
Post by spielwurfel on Mar 17, 2021 0:30:33 GMT
Yes
Actually I did already sent this question, I’ll post in here if there’s anything interesting about it =)
|
|