tzbfr
New Member
Posts: 2
|
Post by tzbfr on Feb 22, 2021 21:48:59 GMT
Hi, recently bought an obd11 device for my fr184 (17 plate). I have tried changing a few things on the car by using the 'app' section on obd11.
First thing I did was add the park assist/pilot visual on display, which works fine.
However I tried adding the needle sweep but it doesn't seem to have done anything even though I have added and paid credits for the app. Also tried to do the 'one click folding mirrors' but it says something about it not being available/compatible even though my mirrors are folding mirrors?
Does anybody have any advice on how to get these 2 functions to work?
Sorry if I'm being daft, literally only got the car and obd11 device 2 days ago. Any help appreciated.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 22, 2021 22:22:35 GMT
Does your car have a digital or analogue dashboard.
Do you have a pro license
|
|
tzbfr
New Member
Posts: 2
|
Post by tzbfr on Feb 23, 2021 5:43:15 GMT
Pro license and analogue dashboard. Thanks.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2021 6:10:19 GMT
can you confirm that bit 0 of byte 1 in control unit 17 is ticked
this is coding for mirrors
Lower right mirror to put reverse gear * Applicable up to MY16 *
With this mod, when you put the reverse gear and the mirror selector in R, the right mirror lowers to the position memorized. 1 - Module 52 - Passenger door electronics 2 - Extended coding (Bytes Mode) 3 - Byte 04 - (Activate Bits 2 and 3) 4 - Module 09 - Electronic control unit - Code (31347) 5 - Adaptation 6 - Access control 2 7 - Menuesteuerung Spiegelabsenkung - (Change value to Activated) 8 - Spiegelabsenkung bei Rueckwaertsfahrt - (Change value to Activated)
* Applicable from MY17 *
1 - Module 52 - Passenger door electronics 2 - Extended coding (Bytes Mode) 3 - Byte 04 - (Activate Bits 2 and 3) 4 - Module 09 - Electronic control unit - Code (31347) 5 - Adaptation 6 - Spiegelverstellung 7 - Menuesteuerung Spiegelabsenkung - (Change value to On) 8 - Spiegelabsenkung bei Rueckwaertsfahrt - (Change value to On)
To memorize the reverse gear position, set the mirror selector to R. Engage reverse. Adjust to a position that suits you. Put the gear out of reverse and wait a few seconds. Change the selector to 0 and the mirror should return to the normal driving position.
|
|