|
|
Post by gftdhdh on Feb 2, 2021 15:13:48 GMT
hi everyone, wanted to know when this vehicle will be fully supported with various coding instructions, thanks everyone.
|
|
|
|
Post by Thirsty on Feb 2, 2021 15:55:12 GMT
If the vehicle has SFD protection you'll need to wait otherwise you're free to code, adjust ...
What coding instructions are you looking for?
|
|
|
|
Post by gftdhdh on Feb 2, 2021 22:52:55 GMT
Thanks Thirsty, yes I think that this model of Octavia (NX) has SFD protection, no problem I”ll waiting...
I’m looking how to enable autolock after I left the vehicle.
|
|
|
|
Post by HarryBrecher on Feb 6, 2021 0:40:16 GMT
Hi. My name is Harry and i also look forward for the support of this new octavia.
I am particularly interested in fog lights turning on automatically when cornering.
Thanks!
|
|
|
|
Post by futach on Feb 10, 2021 16:41:30 GMT
hi all
i just got my 2020 octavia coded with obd11, setting lane assist to "last setting"
driver assistance (module A5) > long coding > Configuration for lane departure warning KI15 > change to "last setting"
this worked only with hood open
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 10, 2021 22:40:38 GMT
Based on what we know so far the MK4 is protected by SFD.
What this means from what we have seen on the Golf and Leon (also SFD Protected) is that Control Unit 08 air con, 17 (Dashboard) and A5 (Drivers assistance) are able to be coded but Control unit 09 is not open for changes, but if somebody knows otherwise that would be helpful.
it appears all new VAG cars need the bonnet open to code
|
|
|
|
Post by gftdhdh on Feb 11, 2021 16:55:02 GMT
hi all i just got my 2020 octavia coded with obd11, setting lane assist to "last setting" driver assistance (module A5) > long coding > Configuration for lane departure warning KI15 > change to "last setting" this worked only with hood open Hy Futach, what is this encoding for? |
|
an82
New Member
Posts: 1 
|
Post by an82 on Feb 11, 2021 17:32:39 GMT
I saw a Youtube movie about a new Octavia where they had enabled new temperature info on dashboard. It now showed oil, dsg and water temp next to eachother. Looked pretty good since it only shows water temp by default.
How do u make this change?
|
|
|
|
Post by futach on Feb 12, 2021 12:42:41 GMT
hi all i just got my 2020 octavia coded with obd11, setting lane assist to "last setting" driver assistance (module A5) > long coding > Configuration for lane departure warning KI15 > change to "last setting" this worked only with hood open Hy Futach, what is this encoding for? Lane assist which is turned on every time you start engine With this it is set to last setting you used before turning engine off |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2021 14:45:51 GMT
futach not sure if this will work on the Octavia but on the Leon MK4 This coding is supposed to work if the air con is turned on. 5/ Deactivate Stop Start Disabling Stop Start thanks to Phipilipipp on the seat-leon.de forum I have seen that some users have problems with this coding on MK3 but It has been confirmed that it works fine on MK4. - Select Control Unit 08 (Air Conditioning) - Select Adaptation - Select Deactivation of Start Stop Function Two places to have a look at to see if the coding matches on your car obdeleven.proboards.com/thread/10746/leon-mk4-coding-adaptations and obdeleven.proboards.com/thread/10689/setting-dashboard not sure if they will work on yours but worth a look. I would also point out that on the review I have done on the Leon a lot of the old coding seems to still be able to work (in other words all the switches and names are the same or very similar). But from the guys in Germany they tell me that you cant code control unit 09 but i have still listed all the coding anyway for when oBD11 get the interface up and running with VW.
|
|
|
|
Post by futach on Feb 13, 2021 15:27:31 GMT
I can confirm that this is NOT working
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2021 17:30:13 GMT
OK Thanks for the update.
|
|
|
|
Post by tomigoki on Feb 16, 2021 9:30:44 GMT
hi all i just got my 2020 octavia coded with obd11, setting lane assist to "last setting" driver assistance (module A5) > long coding > Configuration for lane departure warning KI15 > change to "last setting" this worked only with hood open A big thank you! Just now, I long coded mine as the lane assist was giving me headaches, I only use it on highways as it was too strict on regular roads and constantly beeping. Also found a setting with start-stop and turned it off but that I have to test later when actually have time to drive it for some time. At least in the dashboard it seemed to still be active so Im not having big hopes. If you should know about more settings that can be adjusted please let me know. EDIT: its the same as testeronline wrote so it will not work. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2021 11:58:15 GMT
Thanks for the update, i have one guy in Germany who says this works and have certainly seen it on older cars (Audi and VW) work so its obviously tied in to firmware.
|
|
|
|
Post by alexumf on Feb 21, 2021 8:49:37 GMT
Hi everyone,
I have a question related to the oil level display. I have seen on different YouTube presentation of the car, in the "vehicle status" window there is oil level tab that my car doesn't have.
Does anybody know how to "activate" this..if possible.
PS. I have Bolero hu
|
|
|
|
Post by ptasiek on Mar 10, 2021 7:17:42 GMT
Hi,
I've connected and tried to do some adaptation but it is asking for the key. In Scala code was known. Maybe somebody already knows code for NX octavia.
|
|
|
|
Post by tomigoki on Mar 22, 2021 21:03:27 GMT
Did you open the front hood? (which is now necessary) As mine was not asking for any key.
|
|
napo7
New Member
Posts: 5
|
Post by napo7 on Mar 23, 2021 12:51:01 GMT
Hi,
Just seen that you also have an Octavia IV ? I got one, and i'm tired of the lane assist frequently telling me "please drive in center of your lane"...
Did you find any setting to disable the warning, or make it happen later ? I don't want to disable lane assist, just this warning...
Also, have you tried other codings ?
|
|
napo7
New Member
Posts: 5
|
Post by napo7 on Mar 26, 2021 12:20:08 GMT
Well, I did some test :
Could put setting on "early" instead of "late" and then it seems the warning message gone !
But I also tried to add traffic sign recognition but did not managed: as adaptations in CU works, I can't do long coding, even with bonnet opened, I always have "write failed"...
|
|
|
|
Post by gftdhdh on Apr 3, 2021 15:32:34 GMT
Hi napo7! thanks for this trick, but i tried today on my octavia 4, but i can't do any long encoding, i also have the pro version but it doesn't let me do any encoding as if it was locked, how did you change that value?
|
|
napo7
New Member
Posts: 5
|
Post by napo7 on Apr 4, 2021 17:31:02 GMT
Did you try to open the bonnet ?
I have to open mine everytime I want to code something
PS : "one clic" long coding works fine, but changing bits in byte mode always give me "writing failed"
I would love to add traffic sign recognition, but setting adaptations in 5F is not possible for now since it is SFD protected !
|
|
|
|
Post by gftdhdh on Apr 6, 2021 12:03:17 GMT
Thanks it works!! I noticed a (too expensive) purchase appeared in the on-board computer store, auto on-off of the high beams, is it possible to activate this function via long coding? thanks for the replies.
|
|
napo7
New Member
Posts: 5
|
Post by napo7 on Apr 7, 2021 19:29:31 GMT
Hi,
I did noticed it too... Surprisingly, there is probably other functions that could be purchased (traffic sign recognition), but they decided to not propose them.
I did not managed to enable light assist : it require either coding in the 09 and/or 5F modules, which are SFD protected.
Perhaps a future update of obd11 will allow it, but until now, it's not possible...
|
|
|
|
Post by cioce on Apr 8, 2021 8:58:37 GMT
Light assist and everything you can buy in the shop cannot be added with a simple coding like in the past, it's already all coded but locked somewhere that no one know.  |
|
|
|
Post by tomigoki on Apr 13, 2021 7:46:33 GMT
I was trying a bit and found out I can change the " Overtaking right prevention" to disabled.
So if you have the ACC fitted and in city you don´t want the ACC to stop you from overtaking right you can disable it.
Sadly I didn´t write down where to find that setting but I will add it later when I check again.
|
|
|
|
Post by mariosch36 on Jul 10, 2021 8:28:41 GMT
Hi all,
I have the new octavia estate rs for 1 week and i notice something.
When i unlock the car all the interior lights are working, but when i open drivers door the passenger lights (back lights) are not working with closed doors and the opposite as well (open the back doors and the front lights not working with front doors closed)
Do you know if i have to change something in coding?
Thanks
|
|
|
|
Post by chiptuning on Jul 12, 2021 17:32:52 GMT
Hello!
Has anyone found a solution for stop / start off
Octavia 2021 2.0tdi
Thank you!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 12, 2021 19:17:05 GMT
I thought that VAG had turned off the ability to disable stop start on the MQB Evo and other new platforms.
Happy to be proved wrong but certainly lots of late 2020 cars could not do it.
I presume you dont have a physical button on the MK4 so you can't fit a memory device.
|
|
|
|
Post by pzautodiagnostika on Nov 11, 2021 0:21:35 GMT
hello do you have some coding for this car? octavia 4 ?  for sharing ? |
|
|
|
Post by alexumf on Nov 11, 2021 15:14:49 GMT
Hi and welcome.
Please read some posts before asking the same question on different threads
|
|
for sharing ?