|
Post by daniboom on Dec 11, 2020 14:46:28 GMT
Hello,
First of all sorry for the broken English, but I use a translator, not speaking this language.
I bought OBDEleven in order to unlock the "Video in Motion" and the "Start / Stop" of my Skoda Kodiaq Sportline 2021. However, when I want to apply the codes in the android program, I have the message "not supported" that appears and I cannot make any changes. Do you know if this is an error or if the codes are going to be fixed soon?
Thank you in advance for your response.
|
|
|
Post by iasmin90 on Dec 12, 2020 8:48:04 GMT
Hello,
On my MJ21 i manually coded Start/Stop to not work with the increase of voltage, however Start/Stop is still functional.From what I read from 2020 it is impossible now to remove start/stop.
Disable Start / Stop (Voltage Method) Disable engine Start / Stop functionality.
Select Control unit 19 Adaptation Start Stop Limit voltage Value=12
|
|
|
Post by daniboom on Dec 13, 2020 19:39:22 GMT
Thank you very much iasmin90 for your answer. I will try to perform this manipulation so that the vehicle does not stop anymore.
Nobody has any info for Video In Motion, which is ultimately the most important thing for me to fix?
|
|
adon
New Member
Posts: 3
|
Post by adon on Dec 27, 2020 16:25:31 GMT
Hello, Did you succeed Disable Start/Stop?
|
|
|
Post by daniboom on Dec 28, 2020 3:15:44 GMT
Hello,
No, I did not succeed with the solution proposed above. The setting is saved, but as soon as the engine is stopped, it is reset and returns to the original.
In addition I still have no track for the video in motion. Nobody ?
|
|