rs3
New Member
Posts: 5
|
Post by rs3 on Nov 4, 2020 17:50:52 GMT
Hi all,
has anyone had success on using OBD11 to change the rear lights from standard function to the RS animation, I tried last night and it would not work so did some searching to find out you need to pop the bonnet and the car now accepts adaptions however the rear light adaption said it was successful and used 100 credits but didn’t work.
any help with this would be greatly received.
regards
mr b
|
|
|
Post by tempos84 on Nov 4, 2020 21:29:46 GMT
Hi there. I used the 100 credits app to activate it. Works well on my 2020 A6 with HD Matrix led.
|
|
rs3
New Member
Posts: 5
|
Post by rs3 on Nov 5, 2020 12:13:34 GMT
Interesting 🤔
I have a 2020 A6 sline black edition with matrix headlights and led rear lights however the adaption didn’t work.
I read somewhere that the engine may need to be running as well as the bonnet being opened so I would be keen to know the exact conditions used when you coded this.
Regards
Mr B
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Nov 5, 2020 13:53:08 GMT
This only works if you have standard animated rear lights. Do your rear lights have any kind of animation when you turn them on ?
|
|
rs3
New Member
Posts: 5
|
Post by rs3 on Nov 5, 2020 17:18:02 GMT
The rear lights are the standard sline led units however they look the same as what is fitted to the RS6 and when I noticed this was an option in OBD11 I was hoping it would work. the rear lights still just illuminate as before so any further suggestions would be greatly appreciated.
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Nov 5, 2020 19:34:33 GMT
Unfortunately the led-units are different from the led-unit with animation.
So the app changes the “standard animation” to “rs animation” But it is not possible the change led-units without animation
|
|
rs3
New Member
Posts: 5
|
Post by rs3 on Nov 6, 2020 10:07:10 GMT
Thanks for that information, such a shame it removed 100 credits 😭
regards
RS3
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Nov 6, 2020 10:35:11 GMT
Yes that’s really a shame But the app says “vehicle must be equipped with highline lights that allready have standard animation”
|
|
rs3
New Member
Posts: 5
|
Post by rs3 on Nov 6, 2020 20:57:02 GMT
I must have wrongly assumed I had the high line lights as they look the same as the RS6 rear led lights.
one of lifes learning lessons 😏😂
|
|
|
Post by pnaegele88 on Nov 15, 2020 15:32:31 GMT
Is it possible to change the animation without the oneclick app? By coding the correct settings? In wich Gateway can I find the options to change from Basic to RS?
|
|
robl
New Member
Posts: 12
|
Post by robl on Nov 27, 2020 17:29:24 GMT
Try changing Address 46: Central Conv. Byte 37 to all bits On.
Intelligent tail light all On Info: SBR_variant for RS style animation
|
|
|
Post by aquarian on Dec 5, 2020 3:15:27 GMT
Can anyone else confirm the above?
|
|
|
Post by gregulja on Dec 13, 2020 13:03:44 GMT
No dont work
|
|
|
Post by anilv26 on Dec 13, 2020 21:17:36 GMT
With oneclick app
|
|
|
Post by gregulja on Dec 17, 2020 2:41:35 GMT
Can anyone else confirm the above? Bit 0,1,2,3,4 on all other’s off 😁
|
|
|
Post by pnaegele88 on Dec 22, 2020 23:15:09 GMT
This for the RS Style. What do i have to select for the Basic Style?
|
|
|
Post by loik91 on Dec 23, 2020 22:29:32 GMT
Hey guys
wich version of 46 module do you have?
I can't activate them
|
|
|
Post by sheroo on Dec 28, 2020 9:51:45 GMT
What SBBR varient is the RS, I have 0 to 15 options?
|
|
|
Post by gregulja on Jan 9, 2021 10:33:47 GMT
|
|
|
Post by sheroo on Jan 10, 2021 1:09:44 GMT
Thanks, I changed it to 1 (on my A7) and it works, now just need to figure out the headlights.
|
|
|
Post by joshhunter on Jan 11, 2021 19:00:36 GMT
Can anyone else confirm the above? Bit 0,1,2,3,4 on all other’s off 😁 This works on 2019 Audi A6 S-Line with HD Matrix LED Headlights (i.e. HD Matrix includes standard animation) Bit 0,1,2,3 on all other’s off = Standard Animation that came with the card Bit 0,1,2,3,4 on all other’s off = RS Animation I.e. turning bit 4 on activated this. Thanks
|
|
|
Post by joshhunter on Jan 11, 2021 19:01:48 GMT
This for the RS Style. What do i have to select for the Basic Style? Bit 0,1,2,3 on, all others off i.e deselect bit 4
|
|
|
Post by mitica1 on Jan 20, 2021 18:29:34 GMT
Can anyone explain in more detail how to set up RS animation. Using OBDeleven coding (not apps)
|
|
|
Post by mitica1 on Jan 21, 2021 12:10:51 GMT
I got it. RS6 Animation on Audi A6 C8 After Connected to OBDeleven Go on Control Units>46 Comfort System>Long Coding>tab 01010110> Byte Index 37> Check Bit 4> And finaly Slide to Write. (Bit 0,1,2,3,4 must be checked)
|
|
|
Post by aquarian on Jan 22, 2021 17:48:55 GMT
The following is what I used to change my 2021 S7 rear to RS lighting:
46 Comfort System Long coding find SBBR_variant, old value should be "0" change the value to "1"
|
|
|
Post by hakenalba on Jan 26, 2021 11:40:29 GMT
I got it. RS6 Animation on Audi A6 C8 After Connected to OBDeleven Go on Control Units>46 Comfort System>Long Coding>tab 01010110> Byte Index 37> Check Bit 4> And finaly Slide to Write. (Bit 0,1,2,3,4 must be checked)orThe following is what I used to change my 2021 S7 rear to RS lighting: 46 Comfort System Long coding find SBBR_variant, old value should be "0" change the value to "1" When I want to change the SBBR_variant, from 0 to 1 or switch on Bit 0, 1, 2, 3, 4 I got msg (31) Function not available. I have model 2019, Matrix Led (not HD). Hood was open. Any help plz?
|
|
|
Post by mitica1 on Jan 26, 2021 20:11:37 GMT
I couldn't tell you. I have Matrix LED. Maybe you have ordinary lights that don’t have this option
|
|
|
Post by cuturilod on Feb 26, 2021 10:23:30 GMT
Can anyone else confirm the above? Hi, I can confirm that. Yesterday Iwas coded and working nice.
|
|
|
Post by riotburn on Feb 28, 2021 3:09:44 GMT
How do you tell if you have the right type of taillights? Mine do a basic sweep on lock/unlock. 2020 A6 Allroad prestige (USA). Setting bit 0,1,2,3,4 didn't change anything.
|
|
enry68
Junior Member
Posts: 54
|
Post by enry68 on Mar 25, 2021 16:48:58 GMT
Audi make 3 types of rear LED lights: 1) Normal LED Lights 2) Dynamic LED Lights 3) Animated Lights
To change/activate the animations is required the type 3. The type 2 has only the animation on the arrow from inside to outside. The light type depends of the car equipments.
Enrico
|
|