Bit of information firstly about the History Function. This gives you access to the following types of change that you can make.
Coding, Long coding, Adaptions, Basic Settings, Coding 11, Diagnostic session, App as well as all the Backups you have done. This data is not stored on your phone but on OBD11 Servers so to be able to see it you must be connected to the Internet via WIFI or Mobile Data. If you are not connected you will get error Check network connection and try again.
You can however email these changes so you have an offline record (which many of us keep in excel spreadsheets). One point of note on Email in the Settings screen at the bottom there is a facility for you to enter an email address. If this is populated whenever you send an email of this data it will be pre populated with that email address.
Please note the History is stored against the VIN Number and your account so if somebody else added in your vin number they will only see the standard default picture and no history or personal details of your car...
As you can see we now have 3 new options Filter (By default you get all items but by using the Filter Screen (see below) you can edit what you see in the bottom half of the screen. For example if you chose to only look at Gateway coding the screen will only show changes that fit that Criteria.
Further You can also Filter by Time, this is currently 1 Day, 7 Days, 30 Days or All By using this filter you obviously only see the changes you have requested that fit in that time period.
All the filter has done at this stage is shown you the changes you have made on your Phone or Tablet screen. If you want to get a copy of the items then use the Email Function. This will create a text file with your selection Criteria.
Last change on this screen is the Question Mark which will take you to the Forum for your specific car.
Screen you will be presented with when doing any filtering. Top of screen shows you Time which by default is set to ALL but as above can be changed to one of 3 different settings.
Below is Type what the screen does not show you is final line is Backup, this will then show you all the backup files you have taken and each time you create a new backup you have to give it a name (I use Control Unit followed by date to keep it simple and easy).
You can select all or One or Multiple Types and the screen will then only display this selection. Each time you leave the History screen it goes back to default view.
At the bottom of the Screen is the Clear All (which will untick everything and if you press again will tick everything. Ok will save your changes for this session, cancel will take you back to where you were.
Final part of the history is the Email output, you will get an email with a text attachment called History.txt (see picture below of what this looks like.
The Subject will be your VIN number and the Car Name you have setup in the application.
Email Body of Text
Screen Dump of history.txt
OBDeleven vehicle history log
VIN: Taken from App Car: Name in App Year: Taken from App Body type: From App Engine: Code and Description Milage: In KM
The only item I would mention here is if you make a change by App all that the log will show is you have made a change and the app name, it will not give you the details of change to underlying elements.
Last point the History can be found in the MyCar menu and also in each of the individual Control Unit screens.
Last Edit: Aug 13, 2017 10:03:35 GMT by cupra280
theworkerbee: Hey, anyone have a resolution for (31) Function not available error
Oct 6, 2019 20:23:13 GMT
vwjap: Depends what it’s for, sometimes you need to clear the data in the app, sometimes you don’t have the right password, and sometimes you don’t have that hardware
Oct 6, 2019 20:29:13 GMT
ron2yz: Vehicle: Audi A4 B9
Oct 7, 2019 15:03:20 GMT
vwjap: I haven’t done Audi’s fella, but you should put the security code in before going into long coding
Oct 7, 2019 15:15:16 GMT
aphex13: Anyone out there know how to get the Puddle lights on an MK7 GTI to fade in and fade out instead of just turning on and off? I used the app to keep them on while folding. Then I disabled it, and they don't fade anymore...
Oct 8, 2019 5:06:01 GMT
menno: I need your phone number please give it, your Support is a NIGHTMARE
Oct 14, 2019 12:28:50 GMT
theoldboy: Support can only be contacted via the app or email.
Oct 14, 2019 17:44:01 GMT
driver007: Hello , i hope everyone is well , i just got a odb eleven pro from ebay , i didn't get my bonus credits . I logged on for 10 days and got 10 credits .I tried to get the needdle sweep and it won't write , i used the apps section
Oct 14, 2019 21:11:24 GMT
vwjap: Did the eBay ad say you got extra credits? You can get 5 credits a day by opening app and watching ads, needle sweep is a funny one, some cars it only works when the ignition has been switched off for a while, some new ones don’t work at all
Oct 15, 2019 14:17:28 GMT
sgt1297: You can actually get 6 credits per day - one for logging on and the option to watch 5 adds for a specified length of time, each one worth i credit.
Oct 15, 2019 19:59:20 GMT
vwjap: Which is kinda what I said (as he’d already mentioned he got one a day already
Oct 15, 2019 20:03:30 GMT
k1200s: Getting credits for use with my Audi S5 seems a waste of time as optional one step adjustments have disappeared.. like the comfort flash ..
Oct 15, 2019 21:07:12 GMT
theoldboy: k1200s have you looked in adjustments, retrofits and workshop sections of the app menu just in case they put it in the wrong section
Oct 16, 2019 9:38:50 GMT
audi4life: does anyone know how to reprogram the parking heater so it heats the engine first? Audi A6 c7 4G
Oct 16, 2019 10:24:56 GMT
toman: Can someone with E-Golf post pictures of their Long Coding 0 from the Air Conditioning Control Unit(08), please. I did factory reset and got generic settings not matching my car. Thank you
Oct 16, 2019 16:01:57 GMT
alexrotaru: Hi all, when I connected today my obdeleven a small notification cam up and by mistake I pressed ok. That notification removed control unit 37 navigation and 56 radio and now I get a constant fault in geteway 01044. Can someone help me to recode them again
Oct 16, 2019 18:27:46 GMT
theoldboy: alexrotaru just go to the switchboard and re select 37 and 56 if you had them before. Hopefully you have taken a backup of all your control units and if needed can re code them again.
Oct 18, 2019 12:03:05 GMT