|
Post by philfar on Mar 12, 2020 8:44:37 GMT
Hello, I want to remove all that noising warning Signals. I have been succesful with the belt warning. But now I cannot find a solution for the warning Signal of the electrcal sliding doors when Closing.
And also I cannot find a solution for the warning when the engine is running and I open the Driver door.
The solution;
Turn off engine running warning when door is open [NOT TESTED]
1. Control Unit 17 (Dashboard) = Instrumententafel
2. Adaptation
3. Ignition active message, actuator: change value to:
a. Driver door (Standard)
“All doors”
“No display”
is not available
|
|
|
Post by tomturbo on Apr 15, 2020 7:28:30 GMT
Hey guys,
Does anyone know if it is possible to auto-activate the parking sensors without reverse gear and without pushing the button? Like it’s on even the oldest Touaregs: when you speed gets below a certain threshold it activates the distance sensors and starts beeping. Super useful if you just drive into your garage in front of you.
Much appreciated, Tom
|
|
|
Post by touran2016 on Dec 10, 2020 18:35:51 GMT
Hello sir. I want to do Actication of Daytime running lights via puls witdh modulation (PWM) but i couldnt find it on Byte 16 Bit 2 where you find it. I have a vw Touran 2016 , MQB platform. Any advise from you is welcome. Thank you
|
|
|
Post by touran2016 on Dec 10, 2020 18:36:57 GMT
.
|
|
|
Post by cordoba110 on Dec 31, 2020 22:20:46 GMT
Does anyone knwo the long coding for enable/disable ESP? There is a secret manual function (Turn key over, activate warning lights, press 5 times speed pedal). This shuts off the ESP for me (warning light ESP comes on), but when I start driving the ESP re-activates... I need to disable the ESP to drive in snowy conditions. I don't have an ESP button on the dash like some models/editions have...
|
|
|
Post by bertram on Oct 10, 2021 21:22:14 GMT
Anyone know the security access code for Central Electronics.
I’m trying to code “turn DRL off wen switch in 0”, but it keeps showing to select a channel from 0-255 and won’t accept any access codes.
When plugged to my own Skoda Kodiaq I can easily go to adaptations and search for whatever. Why not with the T5 or T6, even a Seat Mii wouldn’t do it….
|
|
|
Post by shaunb on Sept 22, 2022 12:44:13 GMT
Hi guys, does anyone know how to deactivate byte 19 bit 6 Lamp Diagnostics for Tail Lights? I have installed LED rear clusters and its creating a "bulb out" warning on the dash. I currently have a Second Gen. device with the basic package should I upgrade ?
|
|