dubby
New Member
Posts: 25
|
Post by dubby on Jan 13, 2020 13:05:20 GMT
Just retrofitted climate panel, from standard air con.
Withe the ignition on and mib off I hit the menu button on climate panel it display functions on mib screen, ( not seat heating though) however with the mib turned on it doesn’t display it at all.
What’s missing
|
|
|
Post by dv52 (Australia) on Jan 13, 2020 21:47:30 GMT
^^^adrian: Here's the full "constellation" for CP (I've highlighted the CP master): fortunately for OP - the hex08 module isn't part of the CP facility dubby: is Climate modes set to Display (it's Byte 7, Bit 0) on long-coding for the new module -as per my picture? Don
|
|
dubby
New Member
Posts: 25
|
Post by dubby on Jan 14, 2020 15:14:32 GMT
Hi, yup it’s ticked, but alas no joy😫
|
|
dubby
New Member
Posts: 25
|
Post by dubby on Jan 15, 2020 20:29:10 GMT
Hi, no luck again,, think I might leave it, it is something I didn’t have before, Thanks for your help.👍
|
|
G7D
New Member
Posts: 27
|
Post by G7D on Jan 16, 2020 16:03:47 GMT
Just retrofitted climate panel, from standard air con. Withe the ignition on and mib off I hit the menu button on climate panel it display functions on mib screen, ( not seat heating though) however with the mib turned on it doesn’t display it at all. What’s missing Don't worry about seat heating, afaik it is not adjustable on-screen. If you want you can PM me your adpmap of 5F, I have this function so we can check if it's just a coding issue
|
|
dubby
New Member
Posts: 25
|
Post by dubby on Jan 18, 2020 13:58:34 GMT
Hi, Where would I find this?? You mean a screen shot, ?
|
|