|
Post by baboragi73 on Dec 6, 2019 6:34:35 GMT
There is a problem with coding. The error message is "hold to write value". My car is audi a4
|
|
|
Post by octo|opto|koppler on Dec 6, 2019 7:40:24 GMT
That's not a Problem. When you Change the coding and want to write the values into the Control unit, you have to tap and hold the button until the loading circle appears. It then tells you coding accepted or something like that.
It's the same procedure as deleting faults in your Control Units. No single tap but tap and hold.
|
|
|
Post by baboragi73 on Dec 6, 2019 8:26:33 GMT
Thank you so much
|
|