tox
New Member
Posts: 3
|
Post by tox on Nov 26, 2019 19:04:49 GMT
Hello all together,
i`m new here.
Is it possible to find out, when the fault codes been erased the last time? I`m going to use the obd 11 Pro for checking a used car before buying. It would be nice to know if the fault codes, may be, have been removed shortly.
Sorry if my question been already cleared before. Would appreciate if you`l point out the answer in this case.
Best regards, ToX
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 26, 2019 22:15:01 GMT
As far as I am aware it can only tell you what fault codes you have removed (as they are all stored in history) but it cant tell you (and happy to be proved wrong) if a previous owner / garage has done it.
|
|
tox
New Member
Posts: 3
|
Post by tox on Nov 27, 2019 9:38:14 GMT
Hello testeronline,
than you for your response.
Actually it would be in the first place enough just to know when the fault codes been removed the last time.
To know what fault codes were erased would be very nice, but i think the controller do not have any kind of history logging. However to be aware of the fact that the seller maybe erased the fault codes a day before car inspection is very insightful.
Best regards, ToX
|
|
|
Post by Thirsty on Nov 27, 2019 15:41:30 GMT
As far as i know it's currently not possible to lookup the last time fault codes were removed on the first connection of OBDeleven and the car. You can only see the "timeline" via the app history but this only works if you've deleted the faults. Which means once you delete faults OBDeleven creates a history entry for that.
In your case this won't work because there are no history entries for that car in your app.
|
|