ne1c
New Member
Posts: 6
|
Post by ne1c on Sept 12, 2019 8:12:00 GMT
Hi, guys I've got a car from USA I changed speedometer markup from USA to Europe and speed marks located at different places and that is why arrow shows incorrect speed. I want to change the arrow step from USA to Europe anybody knows how I can do it?
|
|
ne1c
New Member
Posts: 6
|
Post by ne1c on Sept 12, 2019 19:19:37 GMT
|
|
|
Post by dv52 (Australia) on Sept 12, 2019 22:00:44 GMT
^^^^^ Not sure about this suggestion - but try this:
Go to Dashboard module @ address hex17 - then select adaptation - then search for "Units adjusted". If the search vector is successful, select Speed - then set as Kilometers per hour.
If your Dashboard module does indeed have the "Unit's adjusted" group of adaptation channels, it may be prudent to also change Units adjusted-Distance to
Kilometers so that the odometer reading is correct - and you might think about how you want the other metrics to be displayed (i.e. date, pressure etc.) Don
PS:
|
|
ne1c
New Member
Posts: 6
|
Post by ne1c on Sept 13, 2019 6:14:14 GMT
You didn't understand me) Display shows information in correct units. But old school display(arrow) shows miles instead of km, because early on speedometer markup there were miles not there are km. For correct understanding I took a photo ibb.co/2ZqGs5W Arrow shows miles if there were miles and I want to that it shows km.
|
|
|
Post by dv52 (Australia) on Sept 13, 2019 8:26:31 GMT
You didn't understand me) Display shows information in correct units. But old school display(arrow) shows miles instead of km, because early on speedometer markup there were miles not there are km. For correct understanding I took a photo ibb.co/2ZqGs5W Arrow shows miles if there were miles and I want to that it shows km. hmm......... I do think that I understand you. Just humor me for the moment- please.
Go to the channel that I suggested above. Does the channel actually exist on your dashboard module? If so what is the setting for this channel on your car? If the channel does not exist, go to the coding screen in wgolfmk7 post. What is the value on your car for the highlighted entry for speed (it's shown as "Velocidad"-in the picture, which I assume is Spanish for "speed")?
Don
|
|
ne1c
New Member
Posts: 6
|
Post by ne1c on Sept 13, 2019 8:40:33 GMT
There is set km/h.
And off-topic questions: how can I change the region for car?
|
|
|
Post by dv52 (Australia) on Sept 13, 2019 9:53:52 GMT
^^^ OK- then you are correct - I don't understand!
Off topic question - change region for what purpose?
Don
|
|
ne1c
New Member
Posts: 6
|
Post by ne1c on Sept 13, 2019 11:20:52 GMT
Maybe it'll help arrow to show right speed? Because now the region is USA
|
|
|
Post by dv52 (Australia) on Sept 13, 2019 11:34:12 GMT
^^ OK - the only region setting that I know in the dashboard module is in Byte 8 - but this setting only changes the language that the instruments panel will display. There is a region setting in the hex 5F module for navigation, but changing this requires the proper SWAP activation codes (dealers only)- and the other region setting in the hex 5F module is used to change the radio frequencies.
|
|
ne1c
New Member
Posts: 6
|
Post by ne1c on Sept 13, 2019 12:05:04 GMT
I don't have these codes. Maybe you have other ideas about how I can calibrate arrow?
|
|