|
Post by sanmark on Jun 17, 2019 18:09:38 GMT
Hello, Can someone help me out. I have 2017 a3 sedan, and today I activated this DRL settings via apps, but nothing happens. I still don't have menu for lights when leaving or unlocking the car. Only thing in mmi menu is drl on/off and driving on left side... please help I bought this because of this, kind of ironic 😂 Thanks
|
|
|
Post by adiwob on Jun 18, 2019 6:41:07 GMT
Hello, Can someone help me out. I have 2017 a3 sedan, and today I activated this DRL settings via apps, but nothing happens. I still don't have menu for lights when leaving or unlocking the car. Only thing in mmi menu is drl on/off and driving on left side... please help I bought this because of this, kind of ironic 😂 Thanks Hello try this: Go into Module 09 Central Electronics Select Adaptations, then Aussenlicht Front Select Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich Set value to Active. The default is "not active" Click on accept, and enter 31347 as the security code.
|
|
|
Post by dv52 (Australia) on Jun 20, 2019 8:49:28 GMT
I still don't have menu for lights when leaving or unlocking the car. So - to get the lighting for "leaving" (which I assume you mean Leaving Home LH function) and "unlocking the car" (which I assume you mean Coming Home CH function) do this:
- Fire-up OBD11 software and connect to the dongle
- Navigate to Central Electrics module @ address hex09
- Select Security Access
- Enter the magic number 31347
- Select Adaptation
- Search for "uebergreifend" and select Außenlicht_uebergreifend
- Change the following channels as shown:
- Coming Home Leuchten (Coming home lights) > Low beam (select whichever front lights you want from the options)
Coming Home Verbaustatus (Coming Home initiation method) > automatic Coming-home Einschaltereignis (Coming-home power-on event) > Driver door Leaving-Home Verbausstatus (Leaving-Home status) > Enabled Menueeinstellung Cominghome (Menu Setting Coming home)> 20 seconds (you can change this time later in the MENU) Menueeinstellung Leaving-home Zeit per BAP (Menu setting Leaving-home Time per BAP) > 60 seconds (you can change this time later in the MENU) Menuesteuerung Coming Home Werkseinstellung (Menu control Coming Home Factory setting) > active (you can change this later by removing the tick for LH in the MENU) Menuesteuerung Leaving-home Freischaltung per BAP (Menu control Leaving-home Activation via BAP) > active (you can change this later by removing tick for LH in the MENU)
This procedure sets-up the basic CH/LH function (assuming that your car has the light-sensor on the windshield). Switch-ON for CH is triggered by the channel that has the setting "driver door" - meaning when the driver door opens, CH is initiated. The switch ON period for CH is set by the "20 second" value - this timing starts counting-down after the last door on the car is closed (including the hatch/boot-lid)
After you have this facility running correctly, you can then "add" more lights into the CH/LH activity by modifying the appropriate Leuchte-sets with the Leuchte- command Coming Home oder Leaving Home aktiv
Good luck!
Don
|
|
|
Post by sanmark on Jun 26, 2019 9:54:06 GMT
Thank you very much.
|
|
|
Post by sanmark on Nov 22, 2019 9:09:43 GMT
I have managed to get Ch/Lh lighs to work. But I would like to set only drls to light up. Under ausenlicht_uebergreifend, coming home leuchten there are only two options. Low beam and fogs. How do I set only drls to light up for Ch/Lh ?
|
|
|
Post by dv52 (Australia) on Dec 10, 2019 19:28:47 GMT
Hmmm..... that's a tad more trickier because it depends on how your particular car is programmed and what type of lamps the DRLs have
Don
|
|