|
Post by westy66 on Jun 4, 2019 23:50:15 GMT
Greetings anyone who decided to click on this and may be able to help me i just purchased a standard unit from Amazon for my 2003 Volkswagen Eurovan. I was contemplating a ScanGauge II, but this is waaay more modern LOL My question is i want to monitor transmission temperature among other things. I was not able to find it in the "Gauges" section. After hunting around in the forums, i think that may be able to be displayed with the "Live Data" I dont want to shell out another $35 for Pro if this isnt going to work for me. I tried to display live data and it asked me to Upgrade or offered 5 Credits to "Try". I spent the 5 credits and then it asked me for a number from 0-255, but i didnt have one and then just like that i lost the credits. The customer service of OBD11 is average at best. Does anyone know if i can display trans temp in real time like on the ScanGauge? thx Bob
|
|
|
Post by adiwob on Jun 5, 2019 6:25:15 GMT
Welcome, if you have gearbox 09G the group for temperature is 006 (Field 1) or 010 (Field 1) in live data. If you don't have this gearbox please post your software number from 02 - Gearbox -> info-> software number.
|
|
|
Post by westy66 on Jun 5, 2019 10:41:49 GMT
Thank you for the response. How do I find out what these numbers are for the live data? I feel like I would be guessing a number between 0 and 255 LOL I believe my eurovan transmission is a 01P
If I update to Pro and am unable to use this, can I sell it to a friend to use.
|
|
|
Post by westy66 on Jun 5, 2019 12:18:47 GMT
OK, here is my software No. 01P927733CM
Coding: 0000
Protocol: K-Line: KWP1281
Thank you for your help.
|
|
|
Post by adiwob on Jun 6, 2019 6:01:44 GMT
Hello, this is the live data for your gearbox, as you can see for temperature it's group 005.
Group-Bit-info
001-1-Selector Lever-Position
001-2-Throttle Valve-Voltage-Specification: 0...5.0 V
001-3-Value of-Accelerator Pedal-Specification: 0...100 %
001-4-Multi-Function-Switch
002-1-Solenoid Valve 6-Actual Current-N93 (Specification: 0.0...1.100 A)
002-2-Solenoid Valve 6-Specified Current-N93 (Specification: 0.0...1.100 A)
002-3-Battery-Voltage-Specification: 0...15.93 V
002-4-Vehicle Speed-Sensor Voltage-G68 (Specification: 0...5.0 V)
003-1-Speed--Specification: 0...255 km/h
003-2-Engine Speed--Specification: 0...7650 RPM
003-3-Selected Gear
003-4-Value of-Accelerator Pedal-Specification: 0...100 %
004-1-Solenoid Valves-Condition
-- ?xxxxx = Solenoid Valve 1 (N88)
-- x?xxxx = Solenoid Valve 2 (N89)
-- xx?xxx = Solenoid Valve 3 (N90)
-- xxx?xx = Solenoid Valve 4 (N91)
-- xxxx?x = Solenoid Valve 5 (N92)
-- xxxxx? = Solenoid Valve 6 (N94)
--
-- 101000 = P
-- 001000 = R
-- 101000 = N
-- 001000 = D/1H (Lever in D- Gear 1 hydraulic)
-- 001000 = D/1M (Lever in D- Gear 1 mechanical)
-- 011000 = D/2H (Lever in D- Gear 2 hydraulic)
-- 011000 = D/2M (Lever in D- Gear 2 mechanical)
-- 000000 = D/3H (Lever in D- Gear 3 hydraulic)
-- 000000 = D/3M (Lever in D- Gear 3 mechanical)
-- 110001 = D/4H (Lever in D- Gear 4 hydraulic)
-- 110001 = D/4M (Lever in D- Gear 4 mechanical)
004-2-Driving Mode
004-3-Selector Lever-Position
004-4-Speed--Specification: 0...255 km/h
005-1-ATF Temperature--Specification: -40...+170 °C
005-2-Multi-Function-Switch 2
005-3-Gear to be-engaged
005-4-Engine Speed--Specification: 0...7650 RPM
007-1-Selected Gear
007-2-Lock-Up clutch-Slip Slipping-Specification: 0...3820 RPM
007-3-Engine Speed--Specification: 0...7650 RPM
007-4-Value of-Accelerator Pedal-Specification: 0...100 %
|
|
|
Post by westy66 on Jun 6, 2019 10:41:04 GMT
Thank you so much for your help. I will try this today. It seems like I can display multiple live data values at the same time at once. Is there a list somewhere for my vehicle of these items or will I have to ask for each one and then someone here can help? (ie water temp, volts, IAT, etc.)
ALSO, can I change the display value from Celcius to Fahrenheit?
|
|
|
Post by adiwob on Jun 6, 2019 14:47:23 GMT
Where do you want to change to fahrenheit climatronic?
|
|
|
Post by westy66 on Jun 6, 2019 20:09:58 GMT
i have it displaying the trans temp, but it views in Celcius. Can i change this to Fahrenheit?
Can i display more than one live data stream on the same screen?
I also upgraded to Pro.
|
|
|
Post by adiwob on Jun 7, 2019 6:00:58 GMT
|
|
|
Post by westy66 on Jun 7, 2019 10:50:53 GMT
Thank you! Thank you! It seems like I am about 90% to where I need it.
One more question. Where can I find a list of values for my engine? I want to add more items (volts, water temp, throttle position, 4pm, etc...)
|
|
|
Post by adiwob on Jun 7, 2019 11:45:58 GMT
Post your engine software number, i will help you.
|
|
|
Post by westy66 on Jun 8, 2019 2:58:28 GMT
Here is my engine software No. 022906032AF
|
|
|
Post by adiwob on Jun 13, 2019 6:00:48 GMT
|
|
alex
New Member
Posts: 2
|
Post by alex on Sept 12, 2020 15:12:03 GMT
hello adiwob, i'm new to obdeleven, i have exactly the same problem, i don't know if you can help me, or refer me to where i can have ECU coding for live data, i really appreciate your time and help! software number: 038906016AF
|
|