|
Post by kantorlinger on May 23, 2019 23:34:22 GMT
I have a new throttle body to install. Can someone assist in how to adapt it using the OBDEleven PRO? I am slightly confused by this process. First Audi.
|
|
|
Post by adiwob on May 29, 2019 6:01:53 GMT
I have a new throttle body to install. Can someone assist in how to adapt it using the OBDEleven PRO? I am slightly confused by this process. First Audi. Hello, please post your 01-> Engine-> Info -> Software number.
|
|
|
Post by kantorlinger on May 29, 2019 20:06:25 GMT
I have a new throttle body to install. Can someone assist in how to adapt it using the OBDEleven PRO? I am slightly confused by this process. First Audi. Hello, please post your 01-> Engine-> Info -> Software number. 8P0907115AH
|
|
|
Post by adiwob on May 30, 2019 6:10:23 GMT
Hello kantorlinger, ok so for Throttle Body Alignment you have to put ignition on engine off and go to 01 Engine-> Basic Setting-> Group 60-> hit on green flag if doesn't start automatically. These are the values and info in 1,2,3,4 Value field 1,Throttle Valve,Sensor 1 (G187),Range: 0.0...100.0 %\nSpecification: 3.0...93.0 %\nSpecification (Idle): XX.0...XX.0 % 2,Throttle Valve,Sensor 2 (G188),Range: 0.0...100.0 %\nSpecification: 97.0...3.0 %\nSpecification (Idle): XX.0...XX.0 % 3,Throttle Adaptation,Steps Counter,Range: 0...8\nSpecification: 8 4,Throttle Body,Alignment Status,Range: ADP RUN/ADP OK/ADP ERROR\nSpecification: ADP OK You have to follow Value 4, when it's finished must show ADP OK.
|
|
|
Post by kantorlinger on May 30, 2019 15:07:55 GMT
That is awesome. Where, if I may ask, did you find all this? Future assistance.
|
|
|
Post by waltan on Aug 18, 2019 15:32:38 GMT
For 06A906033GQ ? 1.6 BSE 2007r.
|
|
|
Post by adiwob on Aug 26, 2019 6:22:27 GMT
|
|
|
Post by lingomay on Aug 27, 2019 5:37:02 GMT
Hey Yall, been following this thread for a while. Its time for me to finally clean my throttle body and TB align everything. Thank you Adiwob for helping us out. What do i put into the values for my Audi q5 3.0T 2014? Software code is 8R0907551F. Thank you again brotha.
|
|
|
Post by adiwob on Aug 27, 2019 6:29:44 GMT
You don't have to put anything, for your car just simply go to 01 engine -> basic setting-> and search in the list Throttle Body. For live data it's the same search in the list Throttle Body.
|
|
|
Post by lingomay on Aug 27, 2019 7:30:39 GMT
got dang you're fast to reply adiwob. you are the god in these forums. Thank you again.
|
|
|
Post by lingomay on Aug 29, 2019 19:30:12 GMT
Hey adiwob, sorry to bother you again man. so does this mean i dont have throttle body alignment for my car in the app?
|
|
|
Post by adiwob on Aug 30, 2019 6:19:07 GMT
No that means your basic setting is successfully done. Not available i think means that no values available to show.
|
|
|
Post by capone on Jan 29, 2020 11:33:19 GMT
Good day, I am getting below errors on my Audi S3 8P. I would like assistance with clearing the errors as they keep reoccurring and my car doesn’t have power and also the turbo doesn’t activate
- P1579 - Throttle valve control unit adaptation not initiated Upper limit exceeded - P1545 - Throttle valve control system Malfunction Implausible signal
My software number is 8P0907115B
Please assist
|
|
|
Post by capone on Jan 29, 2020 11:39:50 GMT
Oh I forgot one last error
P1021
|
|
|
Post by fodcos66 on Feb 24, 2024 4:12:41 GMT
Hey, anyone know how to adapt the TB On a 2001 polo 6n2 1.4 16v AUA ? Sorry for digging in an old chat, any help appreciated, many thanks!
|
|