|
Post by Sekidou on May 4, 2019 3:46:28 GMT
I'm trying to add OEM fog lights to my 2019 Atlas S trim, which does not come with OEM fog lights or the wiring harness to add them. Besides the fog lights I have added a rotary head light switch from a SE trim that includes the front fog light position. I've also added a fog light wiring harness from ECS Tuning that includes the switch trigger wire. I've coded the rotary switch to add LDS mit Nebelllicht. Also have selected fog lights, but still they will not come on. Have checked voltage on the switch #5 pin (Which is where I connected the blue harness relay trigger wire) and it's 0 volts. Would there be any additional coding required?
|
|
4mo
New Member
Posts: 1
|
Post by 4mo on Oct 27, 2019 0:04:45 GMT
Still no success with this. Has anyone been able to add oem fogs to the S model using the headlight switch with fog lights. I did add them, but had to use a stand alone switch wired off of the fuse panel.
|
|