|
Post by kevsanders on Mar 18, 2019 16:44:50 GMT
I apologize for the stupidity. I added my pro code. went into long coding and only scrolled over to the right before exiting out of long coding. The attached image shows the history changes. I don't know what i did. I didn't confirm a change and i wasn't connected to the car. How do i change whatever i did back? thanks bbcode image
|
|
|
Post by Thirsty on Mar 18, 2019 17:14:37 GMT
Check what byte has changed and revert it to the original value. Should be byte 11 cause the old value was 48 and the new one is 40.
|
|
|
Post by kevsanders on Mar 18, 2019 17:26:00 GMT
I also used the app last night to code the amber side markers to turn off. Is this just the long code version of that change?
|
|
|
Post by Thirsty on Mar 18, 2019 18:12:08 GMT
Just check the time stamp
|
|
|
Post by kevsanders on Mar 18, 2019 18:15:19 GMT
They're different. If i go to my history i can see the number that's changed. the 48 to 40. I just don't see an option to change it or how i just don't understand how to change it back, and i don't want to make anything worse.
Thank you for all the replies! I appreciate the help
If it wasn't connected to the car when i made the change, does that mean it wasn't stored in the car. And only the app registered the change?
|
|
|
Post by Thirsty on Mar 18, 2019 18:46:54 GMT
First of all you can't make any changes without being connected to the car. If date and time do not match with the apps you used/things you coded then it's something different. To revert the change open the ECU from the history entry and on top you see the hex value of each byte. Skip through the bytes until you find the one that has changed. Checkout this thread aswell: forum.obdeleven.com/thread/102/long-coding
|
|
|
Post by kevsanders on Mar 18, 2019 20:32:13 GMT
I went into "Long Coding History" and Followed the arrow to the event change i saw the highlighted value "40" I scrolled over to the value and saw a highlighted byte without a check mark. I attempted to check the box, but nothing would change.
Does this sounds like i'm close? All being under the same conditions I made the original change. Not Connected.
Thanks for all your help
|
|
|
Post by Thirsty on Mar 18, 2019 21:09:20 GMT
If you've read and followed the thread i posted above then everything should be ok. To revert any changes you must be connected to your car!
|
|