|
Post by sefuhotzilor on Feb 22, 2019 10:28:19 GMT
Hello,
I tried OBD11 for the first time today on my car. I tried to activate the power trunk closing by remote. App said success. But when I press the button on the remote I only hear a slight noise but the power trunk does not close.
BIG PROBLEM: After this adaption the trunk cover does not move, it stays in the down position.
I reverted the change using OBD11 (setting the power trunk close by key to OFF) but the trunk cover still does not move, it is stuck in the lower position.
Is there any way I can revert any adaption made by OBD11?
Thanks
|
|
|
Post by sefuhotzilor on Feb 23, 2019 13:19:22 GMT
For anyone having the same problem:
1. The problem of the rear hatch cover went away by itself. I locked the car and went to have a cup of coffee. When I came back it was working normally.
2. The rear hatch closing works only by remote: long press to open, short press to close. From the car only opening is possible with the button on the door.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 24, 2019 12:08:03 GMT
Not sure if you can do this on your car but on mine its possible to enable the buttons on the key to work when they are in the ignition.
|
|