|
Post by itdisnawork on Aug 20, 2018 10:23:16 GMT
Has anybody been able to or know how to code for the Virtual Pedal?
My car is a 2017 Kodiaq Edition with rear view camera. I have searched around but not hand any luck in finding if virtual pedal can be coded.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2018 12:18:55 GMT
Not my car but on mine under control unit: 09, access control 2 there is an Adaptation virtuelles_pedal: which has options active / not active
You wont have access control 2 but if you do a search on you backup of control unit 09 hopefully you will find it.
No idea if it works as i presume you need camera in place etc but give it a try
|
|
|
Post by ycodryn on Aug 21, 2018 8:04:10 GMT
Virtual pedal is not in rear camera. There are some sensors under rear bumper. If you don’t have them you can’t code it.
|
|
|
Post by itdisnawork on Sept 12, 2018 7:49:55 GMT
So it seems that their is a electromagnetic sensor that is required for the Virtual Pedal/Easy Boot Open. However I have only found the kit to be sold by the one shop and they dont have the installation manual nor the coding.
I shall keep searching.
|
|