lihof
New Member
Posts: 4
|
Post by lihof on Jun 26, 2018 10:55:29 GMT
Since a few days I have OBDEleven Pro. Yesterday I tried to adapt a setting in control unit 09 (STG09). I have a A5 Cabrio F5 (year 2017), login code should be 31347. Nevertheless, OBDEleven does not allow me to enter this control unit (did not try any other control unit), login code seems to be wrong. After 3 entries, the app was locked for some time (10minutes?). What I am doing wrong? What happens if I enter wrong codes again? Can I "break" or "lock" something in the car? Any hints are highly appreciated, thank you.
Best, Chris
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 26, 2018 11:53:37 GMT
Chris this is not my car but the login code is correct for other MQB Platform cars of this age.
Firstly are you trying to do long coding or are you using Adaptations.
Secondly are you trying to put the security code in first, why dont you make the change and then if a login code is required a popup box will come showing codes if they are know.
Lastly what are you trying to change
|
|
lihof
New Member
Posts: 4
|
Post by lihof on Jun 26, 2018 12:35:51 GMT
Sorry for being imprecise. I am trying "Adaptations" in control unit 09. I tried both way, enter security code first or try to open "Adaptations" and then immediatley get asked for the security code. I am lost ... Thanks, Chris P.S. I was trying to check "Mirror dip" functionality (control unit 52 and control unit 09), which does not work after using one-click-app
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 26, 2018 13:23:35 GMT
They have just done a Firmware update for some Audi issues. Would you be so kind as to log on again, update and then see if you can go to adaptations without being asked for a security code.
Also with regards to the app i notice on the 2012 Model.
Afterward when reversing and the mirror knob is in passenger position (HAVE YOU GOT IT SET TO PASSENGER POSITION OTHERWISE IT WONT WORK) the passenger side mirror witll tilt while on reverse to better show the curb.
If the vheicle have seats with memory (do you have memory seats) mirro postion can be set by selecting gear selector to R and setting mirror to position that must be stored (EG the coding is turned on but you have to store the positions for it.)
|
|
lihof
New Member
Posts: 4
|
Post by lihof on Jun 26, 2018 19:18:17 GMT
It was the wrong security code for my A5 F5 (B9), it is 20113 (and not 31347) for control unit 09.
According to App: Passenger mode is selected. I dont have memory seats, but shouldnt it work also without them? Funny is that I cant go to rear gear in ignition mode only, VC tells me to start engine to select gear.
Thanks for help!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 26, 2018 19:57:40 GMT
Well thats fine you mirror works without the seats (good news) so have you got your mirror set on Passenger side.
|
|
lihof
New Member
Posts: 4
|
Post by lihof on Jun 27, 2018 8:23:14 GMT
Hm .... I dont get the entry in MMI car display to enable this function. Seems to happen for some cars (confirmed by other users too), maybe depended of control unit version?
|
|