hutz
New Member
Posts: 1
|
Post by hutz on Jun 6, 2018 7:47:21 GMT
Morning all,
I've been trying to use the drive select app on the obdeleven device, connected to my 2013 audi a5 sportback s-tronic. So far, it's only coming up with the error message "check if engine is running" or similar wording, while the app itself warns that this particular mod won't work/be applied if engine is running. In any event i've tried this while the engine is running and when it isn't, and the same message appears.
I've been on to Obdeleven support who say that as my car does not have a control unit 5f (MMI??) then this mod isn't possible - that's news to me. My car has the AMI rather than MMI setup.
Anyone have any points on where I go from here? I don't mind having a go at the long coding if I know it's going to work.
All help would be greatly appreciated.
Cheers.
|
|
|
Post by trickyd3sixty on Dec 1, 2018 17:52:20 GMT
If you only have a 2g AMI or MMI the drive select won't work. You need to have the 3g+ system for this to work.
|
|