|
Post by rooster on May 21, 2016 12:13:17 GMT
Hi, I have seen that Video in Motion (VIM) can be activated on A3 8V model with the MMI HIGH unit. This is shown on your YouTube channel: It would be great if you could make a same App also for MMI LOW (standard) unit which has a low resolution screen. I have that car model and I even tried your application and spent 15 euros for 100 credits. Application confirmed the VIM activation as success, but in the end it didn't do the trick. I know that VIM can be enabled also for low resolution screen with Vag-Tech's VAG CAN PRO product, so most probably you could do it as well. If you need some further information or car details I will provide those. Thanks in advance. Cheers, Rooster
|
|
|
Post by OBDeleven on May 24, 2016 13:35:17 GMT
Hi,
Can you watch videos while car is in still stand? And how did you play videos on your MIB LOW unit?
|
|
|
Post by rooster on May 24, 2016 14:09:47 GMT
|
|
|
Post by OBDeleven on May 24, 2016 14:41:37 GMT
Please provide me your OBDeleven account name that you see in top of left side menu, I will add some credits to your account for app test. Also I already made some modifications in VIM app so need to test it.
|
|
|
Post by rooster on May 24, 2016 16:25:29 GMT
Thanks for the quick reply. I sent you a private message with my account details.
Cheers, Rooster
|
|
|
Post by aleksCore on May 25, 2016 9:13:51 GMT
Hi OBDeleven , does it work with Seat Leon 5F 2015 - Navi Plus (MIB2) ? I8H inApp WN2 in purchase contract
|
|
|
Post by rooster on May 26, 2016 7:36:34 GMT
Please provide me your OBDeleven account name that you see in top of left side menu, I will add some credits to your account for app test. Also I already made some modifications in VIM app so need to test it. Ok, I updated the ODBeleven app and purchased the VIM application again (thank for the credits ). Unfortunately end result is still the same; I get the Successful message, but VIM is not working.UPDATE: VIM successfully activated! Now it works thanks for the updated app. In my case it actually required the restart of the MMI system. Thank you ODBeleven for the great after sales support! Your product and support is extremely good. Cheers, Rooster
|
|
|
Post by Ari on Jul 7, 2016 20:52:51 GMT
Does this work with the golf mk7 composition media
Yes the device does play videos stationary through usb
Please advice
|
|
|
Post by Mortalll on Jul 16, 2016 17:03:56 GMT
Hello How can i activate vim in my audi a3 8v with a standard mmi ?? I play video with the ami cable for iphone 4
|
|
|
Post by mortalll on Jul 17, 2016 8:17:40 GMT
Do i have to purchase the odbeleven pro or standart one ?
|
|
|
Post by Daniel (Germany) on Jul 17, 2016 8:48:24 GMT
For coding and Adaption you need pro Version
|
|
|
Post by mortalll on Jul 18, 2016 6:11:00 GMT
Hello I cant make the purchase via paypal, what´s the matter ??
|
|
|
Post by robertwalker1181 on Aug 13, 2016 1:23:33 GMT
Hi OBDeleven, can VIM be activated on the 2011 Touareg?
|
|
|
Post by OBDeleven on Aug 14, 2016 11:31:19 GMT
Hi OBDeleven, can VIM be activated on the 2011 Touareg? Yes, there is the app RNS850 video in motion
|
|
|
Post by mortalll on Oct 8, 2016 22:10:04 GMT
Hi I just received my obdeleven and i tried twice to activate the vim with no succes the tried the corner light with no succes to, i only activate the mirror with the rear gear and the gauge sweep Please help me with the vim i spent 200 credits with no succes ! It´s an audi a3 8v with standard mmi
|
|
|
Post by mortalll on Oct 10, 2016 10:40:00 GMT
Everything work fine now, very professional team Thank you
|
|
dekd
New Member
Posts: 2
|
Post by dekd on Oct 11, 2016 14:38:05 GMT
Rooster, sorry to thread hijack... I think I'm the same boat...I'm in a my16 A4 and though video playback would be the norm but I have nothing, even at standstill let alone bypassing any speed controls. Through lots of research, I think I'm where you were high and low mmi? I have mmi nav plus: dvd, twin sd and no joy but the £1500 tech pack option or mmi nav plus touch will play anything? I'm missing a slightly larger screen and touch sensitive controller but I'm hoping there is scope to get video working with odbeleven as the hardware I'm sure is right, just software? My thoughts anyway and I think the same as the low model in A3. I'll get my own post into A4 section but keen to touch base with you. Was your mmi unit not playing video at all or were you just missing the in motion but. Thanks in advance. D
|
|
|
Post by marcelovione on Dec 27, 2016 0:08:43 GMT
Please provide me your OBDeleven account name that you see in top of left side menu, I will add some credits to your account for app test. Also I already made some modifications in VIM app so need to test it. Ok, I updated the ODBeleven app and purchased the VIM application again (thank for the credits ). Unfortunately end result is still the same; I get the Successful message, but VIM is not working.UPDATE: VIM successfully activated! Now it works thanks for the updated app. In my case it actually required the restart of the MMI system. Thank you ODBeleven for the great after sales support! Your product and support is extremely good. Cheers, Rooster Hey Rooster I have a A3 8V low res mmi as you. I can play videos through Genuine AMI AV cable on my screen. Did You restart MMI after or before coding?
|
|
|
Post by rooster on Dec 28, 2016 19:25:00 GMT
Hi Marcelovione, What I did is a following: 1. I changed the coding with app 2. Turned off the engine and went to work 3. After few hours I started my car again and voilá VIM was working. So basically it required a "cold boot" that change was actually activated. Hopefully this helps. Cheers, Rooster
|
|
|
Post by marcelovione on Dec 28, 2016 20:24:15 GMT
Hi Marcelovione, What I did is a following: 1. I changed the coding with app 2. Turned off the engine and went to work 3. After few hours I started my car again and voilá VIM was working. So basically it required a "cold boot" that change was actually activated. Hopefully this helps. Cheers, Rooster It wil work !!! OBD11 on the go to Brazil Tanks, Rooster
|
|
|
Post by rpspereira on Jan 8, 2017 12:03:27 GMT
Hi Marcelovione, What I did is a following: 1. I changed the coding with app 2. Turned off the engine and went to work 3. After few hours I started my car again and voilá VIM was working. So basically it required a "cold boot" that change was actually activated. Hopefully this helps. Cheers, Rooster It wil work !!! OBD11 on the go to Brazil Tanks, Rooster Marcelo, hi, can you help me in portuguese language? I have the standard display 5" I ativated the vim but get 11errors... and dont work i have the cable to my phone
|
|
|
Post by antibiotico on Feb 14, 2017 21:14:56 GMT
Could a OBD11 Pro activate the VIM feature in the new model of Audi A3 (2017) with MMI plus? It's possible changing the layout of the A3 TDI in the layout used for the Audi S3? The start and stop feature in the new Audi A3 could be deactivated with the OBD11 Pro?
|
|
|
Post by audia38v on May 19, 2017 16:42:29 GMT
provato su a3 2014 non a funzionato provato cinque volte perso 500 crediti come posso recuperare i crediti
|
|
|
Post by Eyelevel on Sept 8, 2017 5:38:21 GMT
I have a new 2017 RS3 Sedan with MMI software version 1106. The App to disable VIM states it does not support either 1117 or 1106. Naturally I tried the VIM App before I realised that my 1106 version wouldn't work. My 100 credits were deducted. I can live with this, but ultimately I bought this OBD11 secifically to disable this. Does anyway know how I can disable VIMm for these new software versions?
|
|
|
Post by minovg on Jan 26, 2018 14:27:41 GMT
Sorry guys this feature doesn’t work in new models... I purchased the dongle only for that reason, I purchased 100 credits for an extra 14,99€ and the feature does not work. I am really completely unsatisfied.
|
|
|
Post by minovg on Jan 26, 2018 14:29:56 GMT
I have a new 2017 RS3 Sedan with MMI software version 1106. The App to disable VIM states it does not support either 1117 or 1106. Naturally I tried the VIM App before I realised that my 1106 version wouldn't work. My 100 credits were deducted. I can live with this, but ultimately I bought this OBD11 secifically to disable this. Does anyway know how I can disable VIMm for these new software versions? exactly the same... 1106 software version. My car is an Audi A3 sedan , 2017 model. Did you find anything to solve this??
|
|
|
Post by Kalil on Feb 1, 2018 8:48:05 GMT
Hi, I have successfully enabled VIM by OBDeleven device. It is super easy and straightforward. But there comes a problem. Now there is no sound while playing video. How can I fix it?
|
|
urban
New Member
2013 A5SB (8TA)..................... 2.0Tdi (230bhp)...........MMI 3GP KWP2000 & UDS Mix
Posts: 10
|
Post by urban on Feb 2, 2018 2:17:43 GMT
Hi I just received my obdeleven and i tried twice to activate the vim with no succes the tried the corner light with no succes to, i only activate the mirror with the rear gear and the gauge sweep Please help me with the vim i spent 200 credits with no succes ! It´s an audi a3 8v with standard mmi 5F > Info > **take note of your serial Number**
Use it here www.audienthusiasts.com/Articles_VIM.html5F > Security > **Insert code as above** > Adaptation > Channel 48 = 0 > changed to 255
|
|
urban
New Member
2013 A5SB (8TA)..................... 2.0Tdi (230bhp)...........MMI 3GP KWP2000 & UDS Mix
Posts: 10
|
Post by urban on Feb 2, 2018 2:19:41 GMT
Hi, I have successfully enabled VIM by OBDeleven device. It is super easy and straightforward. But there comes a problem. Now there is no sound while playing video. How can I fix it? Ensure the video is within the limitation of the system, check in your MMI manual for video formats
|
|
mitch
New Member
Posts: 1
|
Post by mitch on Sept 6, 2018 7:34:41 GMT
Hello, I'm new to the forum and I have not looked at all the topics yet, but can anyone tell me if I turn off video in motion with obdeleven and then I want to turn it on again, will I want credits again? And my second question is, because the car is new, will I have problems with the dealer and the warranty especially for video in motion? Thanks!
|
|