|
Post by apeter on May 13, 2018 13:20:04 GMT
Hi, Can some one know what item will impact it (after change OBDelevn)? Thanks for help Peter
|
|
|
Post by Thirsty on May 13, 2018 16:22:29 GMT
Could you explain your problem a bit more? Did you make any changes with OBDeleven before this error happend?
|
|
|
Post by krystian660 on May 14, 2018 8:22:50 GMT
Do this: STG 55 or 4B Basic Settings > "Basic headlight setting" Basic Settings > "Acknowledge basic setting"
|
|
|
Post by apeter on May 18, 2018 5:08:42 GMT
Thanks for information. The error code on 4B is "C107E54".
|
|
|
Post by krystian660 on May 18, 2018 6:19:39 GMT
My previous post help you.
|
|
|
Post by apeter on May 18, 2018 17:06:06 GMT
After clear 4B error code, the problem was solved.
Thanks for all.
|
|
|
Post by softsand on May 20, 2018 12:42:57 GMT
I somehow managed to trigger this but chanced upon the fix too thank goodness.
Were you trying to activate the auto high beam ? (I was !)
|
|
|
Post by krystian660 on May 20, 2018 21:31:28 GMT
I somehow managed to trigger this but chanced upon the fix too thank goodness. Were you trying to activate the auto high beam ? (I was !) High Beam Assist STG09 Security access 31347 Adaptation FernlichtAssistent Menusterung Fernlichtassisten -> Present Menusterung Fernlichassisten werkseinstellung ->Present Erweiterte Fernlichtassisten -> AFS, FLA, Fernlicht uber AFS STG A5 Coding Byte 21 bit 5-7 - High Beam Assist Read more: forum.obdeleven.com/thread/3428/high-beam-assist#ixzz5G519tx1T
|
|