sebxx
New Member
Posts: 6
|
Post by sebxx on May 7, 2018 19:15:41 GMT
This is possible!
It will still let you keylessly exit the vehicle or turn on the ignition,
Long coding Control unit: B7 Access Startsystem Interface Values: Passive entry frt.pass. door handle: Old value: activated New value: Not activated Passive entry driver door handle: Old value: activated New value: Not activated
This will prevent those bad guys actions
|
|
ttt
New Member
Posts: 12
|
Post by ttt on Oct 7, 2018 18:42:53 GMT
Best way to disable kessy sensors in door handles thru the doors modules.
|
|
|
Post by scrounger on Dec 30, 2018 9:11:35 GMT
will this work on Tiguan mk2?
|
|
|
Post by captainmidnight on Feb 10, 2019 20:49:10 GMT
This is possible! It will still let you keylessly exit the vehicle or turn on the ignition, Long coding Control unit: B7 Access Startsystem Interface Values: Passive entry frt.pass. door handle: Old value: activated New value: Not activated Passive entry driver door handle: Old value: activated New value: Not activated Can anyone confirm if this is the ONLY coding change required to disable keyless entry via the front driver and passanger door handle sensors? Reason for asking, I'm sure I've seen a similar coding solution on a German VW Tiguan but they also included other control units? Again I also have a VW Tiguan 2016 MK2 Update: Confirmed working after test coding on a VW Tiguan 2016 MK2 on 12/2/2018 - only keyless door handle entry function is disabled on both front door handles.
|
|