|
Post by Martynas Šileika on Apr 26, 2018 8:20:22 GMT
Fixed OBDII and KWP1281 connect issues on some vehicles Fixed update for non Play Store version on Android 8+ Everyone having issue with app update and can't do it via Play Store, please download app here and install it manually.
|
|
|
Post by tomtee on Apr 26, 2018 13:37:53 GMT
Martynas, I updated the OBD11 app from 0933 to 0934. If you recall I had problems with the v0932 app (see here: forum.obdeleven.com/post/14855/thread) connecting to the ABS controller of my 1993 VW. After the update to 0934 it is now connecting to the ABS controller and also displaying faults. Thank you for the fix & your fast support. Having stated this there still might be a problem with the Engine module. Prior to 0933 there was a static fault for the SAI system in the Engine module. This fault was present for a long time because it is very difficult to diagnose. After upgrading from 0932 to 0933 this fault was no longer displayed on the OBD11 app. The same thing is happening with 0934. No fault is present for the SAI system. Would it be possible to enable error logging for the Engine module to see if you can detect an error? Thanks, Tom
|
|
|
Post by Martynas Šileika on Apr 26, 2018 13:42:01 GMT
Martynas, I updated the OBD11 app from 0933 to 0934. If you recall I had problems with the v0932 app (see here: forum.obdeleven.com/post/14855/thread) connecting to the ABS controller of my 1993 VW. After the update to 0934 it is now connecting to the ABS controller and also displaying faults. Thank you for the fix & your fast support. Having stated this there still might be a problem with the Engine module. Prior to 0933 there was a static fault for the SAI system in the Engine module. This fault was present for a long time because it is very difficult to diagnose. After upgrading from 0932 to 0933 this fault was no longer displayed on the OBD11 app. The same thing is happening with 0934. No fault is present for the SAI system. Would it be possible to enable error logging for the Engine module to see if you can detect an error? Thanks, Tom Glad to hear that ABS is now working. We have your previous log on Engine. This needs more investigation. Can you also provide info section screen of your Engine control module?
|
|
|
Post by tomtee on Apr 26, 2018 13:50:18 GMT
Martynas, I updated the OBD11 app from 0933 to 0934. If you recall I had problems with the v0932 app (see here: forum.obdeleven.com/post/14855/thread) connecting to the ABS controller of my 1993 VW. After the update to 0934 it is now connecting to the ABS controller and also displaying faults. Thank you for the fix & your fast support. Having stated this there still might be a problem with the Engine module. Prior to 0933 there was a static fault for the SAI system in the Engine module. This fault was present for a long time because it is very difficult to diagnose. After upgrading from 0932 to 0933 this fault was no longer displayed on the OBD11 app. The same thing is happening with 0934. No fault is present for the SAI system. Would it be possible to enable error logging for the Engine module to see if you can detect an error? Thanks, Tom Glad to hear that ABS is now working. We have your previous log on Engine. This needs more investigation. Can you also provide info section screen of your Engine control module? Yes I will re-connect and get it to you. Thanks.
|
|
|
Post by tomtee on Apr 26, 2018 14:05:11 GMT
Martynas, Here is the info from the Engine module: Motor PMC3 Software #021906258BA Protocol K-line KWP1281 Baud 9523bps Let me know if you need anything else.
|
|
|
Post by Martynas Šileika on Apr 26, 2018 20:17:45 GMT
Martynas, Here is the info from the Engine module: Motor PMC3 Software #021906258BA Protocol K-line KWP1281 Baud 9523bps Let me know if you need anything else. Thank you for your info. Could you confirm that every time you connect to engine, you get 9523bps baud rate? Normally it should be about 9600bps mostly 9615bps
|
|
|
Post by tomtee on Apr 27, 2018 14:32:25 GMT
Martynas, Here is the info from the Engine module: Motor PMC3 Software #021906258BA Protocol K-line KWP1281 Baud 9523bps Let me know if you need anything else. Thank you for your info. Could you confirm that every time you connect to engine, you get 9523bps baud rate? Normally it should be about 9600bps mostly 9615bps I just ran another scan and the baud rate was 9523 again.
|
|
|
Post by wildog on Apr 30, 2018 7:02:33 GMT
Exactly the same here, I sent them a request through phone help link. I have Samsung S6 cell phone with latest updates.
It worked well, it forced me to update at Friday, and right after, I cannot swipe through blocks. the workaround is to go back to live data, and choose needed block.
it's annoying - I can not use the dongle like this - very frustrating.
Who can help? where is the official support to raise it in high priority?
I am driving Seat Leon Cupra 2010
My Friend experiences the same problem, with LG cell phone and Seat Leon Cupra 2009.
Guys, please fix it - it's a major bug in main path - how did you miss such an obvious testing case.... it's main functionality, damage your credibility as professionals.
|
|
|
Post by wildog on May 1, 2018 7:17:25 GMT
I was recommended to clean the app cache in Android - done it, logged in again - DOES NOT HELP
Please fix it.
|
|
|
Post by Martynas Šileika on May 2, 2018 12:08:02 GMT
Exactly the same here, I sent them a request through phone help link. I have Samsung S6 cell phone with latest updates. It worked well, it forced me to update at Friday, and right after, I cannot swipe through blocks. the workaround is to go back to live data, and choose needed block. it's annoying - I can not use the dongle like this - very frustrating. Who can help? where is the official support to raise it in high priority? I am driving Seat Leon Cupra 2010 My Friend experiences the same problem, with LG cell phone and Seat Leon Cupra 2009. Guys, please fix it - it's a major bug in main path - how did you miss such an obvious testing case.... it's main functionality, damage your credibility as professionals. Hello we have fixed this problem with v0.9.3.5 update
|
|