zooks
New Member
Posts: 3
|
Post by zooks on Apr 5, 2018 13:03:22 GMT
Hi, Please can someone point me in the right direction for reversing camera retrofit long coding. Thanks
Edit* Doesn't matter done it now
Gateway 19 > Adaptions > Installation list > Specified installations > Camera System Rear View > coded > Save. Information Control 5F > Security Access > 20103 > Adaption > VPS_0x0B > Activated > OK. Then select VPS_0x0B_msg_bus > Databus Infotainment > Save. Park asist 10 (or 76 on MY17 on cars) > rear view camera > Installed > Save
Check 6C module is now in the list then > Long code 0237060102002001000040
|
|
|
Post by macdowel22 on Jul 30, 2019 10:36:18 GMT
Hi, Please can someone point me in the right direction for reversing camera retrofit long coding. Thanks Edit* Doesn't matter done it now Gateway 19 > Adaptions > Installation list > Specified installations > Camera System Rear View > coded > Save. Information Control 5F > Security Access > 20103 > Adaption > VPS_0x0B > Activated > OK. Then select VPS_0x0B_msg_bus > Databus Infotainment > Save. Park asist 10 (or 76 on MY17 on cars) > rear view camera > Installed > Save Check 6C module is now in the list then > Long code 0237060102002001000040 Do I need to use a oem camera or can I fit an aftermarket?
|
|
|
Post by macdowel22 on Jul 30, 2019 10:38:16 GMT
Hi, Please can someone point me in the right direction for reversing camera retrofit long coding. Thanks Edit* Doesn't matter done it now Gateway 19 > Adaptions > Installation list > Specified installations > Camera System Rear View > coded > Save. Information Control 5F > Security Access > 20103 > Adaption > VPS_0x0B > Activated > OK. Then select VPS_0x0B_msg_bus > Databus Infotainment > Save. Park asist 10 (or 76 on MY17 on cars) > rear view camera > Installed > Save Check 6C module is now in the list then > Long code 0237060102002001000040 Can I use an aftermarket camera or only oem?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 26, 2019 15:29:36 GMT
you can only install an OEM camera, if it's used it'll be plug and play, if new instead, you need to code the camera unit with VCP
|
|
|
Post by fullbore on Jan 19, 2020 10:02:45 GMT
you can only install an OEM camera, if it's used it'll be plug and play, if new instead, you need to code the camera unit with VCP Whats involved in the actual fitment of the camera? Donyou have to run a loom all the way through the car or is there a plug inside the boot lid?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2020 20:06:12 GMT
Sadly you need to buy all the loom from the camera to the MMI.. on ebay complete package at 240€...until last week was 100€!
|
|
|
Post by MGRobbie on Jan 31, 2020 6:16:42 GMT
Hi, Please can someone point me in the right direction for reversing camera retrofit long coding. Thanks Edit* Doesn't matter done it now Gateway 19 > Adaptions > Installation list > Specified installations > Camera System Rear View > coded > Save. Information Control 5F > Security Access > 20103 > Adaption > VPS_0x0B > Activated > OK. Then select VPS_0x0B_msg_bus > Databus Infotainment > Save. Park asist 10 (or 76 on MY17 on cars) > rear view camera > Installed > Save Check 6C module is now in the list then > Long code 0237060102002001000040 Can I use an aftermarket camera or only oem? Can you describe what needs to be done, if possible, some pictures?? How easy was it to get the wire through reardoor to car??
|
|