I have tried and failed to initiate TSR because I do not have the correct camera. If you don't have MODULE 5A you don't have the correct camera! I made 3 changes through adaptations in module 5F using the security code 20103.I reset 2 of them to the original values but missed one. I now get an error message when I scan with the OBD11 that I do not believe was there before I carried out the changes. The fault code is U111100 - Function Limitation Due to Missing Message. Now when I enter Module 5F, I enter code 20103 which shows green and is accepted. I then go into adaptations to change the value back to its original value but it will not accept the change. I had previously changed other values but missed this one and having carried out a history check found this value had not been put back to its original setting. What am I doing wrong?
Update. Having tried many times to put the changes made back to the original settings but failed as OBDEleven just would not let me save the changes, I contacted customer support via the help section of the App. Although they didn't know what was preventing me from making and saving changes I was directed to select Advanced Identification. I selected it and was able to look at lots of information but nothing that indicated a problem with the dongle, App or the vehicle. I came out of that and attempted to perform the changes I had up to this point been unable to do. Hey presto - first attempt changes made and accepted - result. The fault code U111100 when cleared did not come back. Happy days. Thank you customer support.
Murrumbidgee: @seb221 its available on ios but has limited functionality
Sept 11, 2019 7:15:57 GMT
Audirey: Couldnt seem to find it, but has anyone adjust DRL led intensity on a Audi S5 B8?
Sept 11, 2019 16:03:15 GMT
RogerMoore: Guys have an A7 is the A5 camera module the same as 85 front camera that I have?
Sept 12, 2019 15:42:15 GMT
RogerMoore: Sorry 85 onboard camera? It's installed on the top of the windscreen gaging out
Sept 12, 2019 15:42:43 GMT
Sept 12, 2019 15:42:52 GMT
ViĆ: Quick question before I go and purchase a new door module for my Golf MK7.5, I have a "5Q4959393F" Driver side door module and want to upgrade to one that ends with 592. Is there a difference between the last letter, can I mix 592F with 593B or E ?
Sept 12, 2019 16:02:56 GMT
ViĆ: or does driver module and passenger module need had to have same last letter ?
Sept 12, 2019 16:03:17 GMT
Cupra ~r: Anyone know how to change km to the actual car I changed quadrant and wanted to put the actual km.
Sept 13, 2019 14:35:05 GMT
Cupra R: Anyone know how to change km to the actual car I changed quadrant and wanted to put the actual km.
Sept 13, 2019 14:35:32 GMT
Ward: Anyone knows how u dan clearing defect drive assist button not working ?
Sept 13, 2019 14:57:38 GMT
billbobaggins1: Does anyone know if there are any changes that can be made to Audi A1?
Sept 14, 2019 12:09:30 GMT
Audirey: Cupra, what do you mean by changing km to the actual car? like just the units?
Sept 16, 2019 15:34:24 GMT
testeronline: If you mean can you change the millage shown on the car then No.
Sept 16, 2019 18:10:47 GMT
marcos: Dears: I made some chancges in the settings of the rear lights of my golf GTI 2013/14 and despite several attempts I could not make them work properly. Would you able to send me the settings original rear lights, the break ligth ond the brake lights so
Sept 17, 2019 18:40:41 GMT
theoldboy: Marcos if you check you history it will show you all the changes you have made, just reverse them. Or if you did a backup have a look at that.
Sept 17, 2019 20:31:17 GMT
marcos: Obrigado pela ajuda. Ocorre que verifiquei no histórico que utilizei o app para o modelo 7.5 do Golf. Ocorre que o meu é MK7. Já tentei de tudo e não consigo alterar. Será que alguém poderia me fornecer as configurações originais das luzes de direção?
Sept 17, 2019 22:17:28 GMT
Berry: I use the app download VIDEO in motion for RMC, after that all monitor change to German language, I go to change language, but I can't change any language the monitor just show., any solution PLEASE.
Sept 18, 2019 14:28:50 GMT