a777
New Member
Posts: 3
|
Post by a777 on Dec 5, 2017 23:59:56 GMT
I bought the OBD eleven to use the one click adaptions. So far I cannot seem to get much of anything to work. I am trying to change the temp on the heated steering wheel. I am going to steering column electronics clicking adaption enter channel comes up I hit the pull down it has value and heated steering wheel click on heated steering wheel first line value says off second value says 30 degrees 3rd says 0.000A fourth says not I put 40 in change value hit the green check it says accepted and nothing changes HELP Does OBD have telephone support?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 6, 2017 13:34:22 GMT
a777 sorry you are having issues, OBD11 Support is all online no phone service.
I dont know your car but you are saying you have 4 values the first being off, should this not be changed to on to enable the temp change to work EDIT or does it mean it turns off at this temp.
Have you got any coding you are following or is it just playing with the various options. If coding can you share just in case you have missed something, it would also help to know car, location (if outside of europe) and specific model.
Lastly with regards to one click are you talking about apps or using the manual adaptions, if the apps dont work then let support know your car details and the app that does not work and they can try and help. Please remember that there are many models of the same car and not all cars have the required hardware to allow the changes to work.
I have also presumed you have the Pro version.
|
|