Hi you need to check if the fatigue detection was activated when you bought the car. If you input your vin through a decoder with vag codes just look up EM0 and EM1. If you have EM0 then the driver alert was not factory enabled if EM1 then it was enabled. I dont have it factory enabled and when i set all the values as you mentioned I get the same error. It is possible that you could get the fatigue detection active for a price at Vw/Skoda.
vwjap: Unless the guy you bought it from will give you his log in details,
Mar 23, 2019 15:58:56 GMT
vwjap: Because that’s what defines if it’s a pro version or not
Mar 23, 2019 15:59:25 GMT
Timmy: I bought the device used, does that matter?
Mar 23, 2019 16:00:19 GMT
Akra_7R: can you change the colour of the arrow in virtual cockpit while still keeping the R theme?
Mar 23, 2019 16:56:26 GMT
cupra280: the 6 digit code is the security code for the Dongle not the Pro activation code. Connect to the car, From Main Menu select settings, schroll down to Password or Password Request and it will allow you to reset the code.
Mar 23, 2019 17:41:22 GMT
Timmy: cupra280 you have to have the device connected to this. I need the code to connect to the device
Mar 23, 2019 18:03:19 GMT
vwjap: Ah my bad, sorry cupra
Mar 23, 2019 19:09:14 GMT
cupra280: @timmy I will try and find some time on sunday but from memory you can do this with the dongle in the car and you running the app. Otherwise I am afraid you will have to speak with the previous owner for the code or on Monday speak with support
Mar 23, 2019 19:17:20 GMT