|
Post by kaluzu on Jan 2, 2020 20:27:53 GMT
kaluzu , that’s to do with how hard you have to move the steering wheel to get the car to register that you have put your hands back on the wheel, not to do with how long hmm, the terms used in that setup call for timing though (early, late...), rather than pressure/force.
|
|
|
Post by vwjap on Jan 2, 2020 20:43:06 GMT
Yeah I know, same as a few things not entirely fitted with the right description, makes it fun to find the mods, but I tried it years ago and it’s still 13 seconds till you get a bing, then 27 seconds it dabs the brakes, then 30 it applies the brakes (didn’t try it for much longer but told it puts the hazards on at some point)
|
|
|
Post by rce1975 on Jan 9, 2020 17:25:03 GMT
Hi there,
I would like to change one thing on my GTI TCR: disable beep when opening driver door with shift button press (With keyless)
Thanks.
|
|
|
Post by filipkudlac on Jan 9, 2020 22:30:28 GMT
hey guys, i need some help. Does anybody know which chanel is for activating windows go up after lock (not holding key) . Well i did it on 2 cars few days ago, (octavia 3 and Polo) but now i just cant figured out which channel this was. anybody here to help ? Also i need to find channel where can i setup my auto lights. I mean there is one channel for cars without light sensor and with auto lights where you can select which source is car using for turning on and off lights. stock is set to sensor built in clusters to managing auto lights.
|
|
|
Post by karlitos on Jan 9, 2020 23:34:07 GMT
hey guys, i need some help. Does anybody know which chanel is for activating windows go up after lock (not holding key) . Well i did it on 2 cars few days ago, (octavia 3 and Polo) but now i just cant figured out which channel this was. anybody here to help ? Also i need to find channel where can i setup my auto lights. I mean there is one channel for cars without light sensor and with auto lights where you can select which source is car using for turning on and off lights. stock is set to sensor built in clusters to managing auto lights. About your first consideration: "for activating windows go up after lock (not holding key)": Wich channel did you use to do this in octavia 3 and Polo? Could you show me step by step?
|
|
|
Post by filipkudlac on Jan 10, 2020 10:14:11 GMT
i would like to, but i cant find this channel, and i forgot which one was it. i did it on ma car look:
|
|
|
Post by vwjap on Jan 10, 2020 13:08:53 GMT
Well if you done it via obdeleven you can have a look in the history of the polo BUT isn’t the mk6 polo got the mk8 golf ECU’s? So maybe don’t get your hopes up that it will work in a golf
|
|
|
Post by filipkudlac on Jan 10, 2020 14:01:34 GMT
Well to windows automaticly go up after lock is one of those two channels:
ENG148616-IDE02022-ZV Komfort (Fensterheber)-Comfort opening ENG148616-ENG154964-ZV Komfort (Fensterheber)-BAP_Komfortschließen
Thats what i found in my history
|
|
|
Post by rce1975 on Jan 12, 2020 16:56:35 GMT
Hi there, I would like to change one thing on my GTI TCR: disable beep when opening driver door with shift button press (With keyless) Thanks. Hi, Anybody can help me? Thanks
|
|
|
Post by vwjap on Jan 12, 2020 17:45:10 GMT
Well to windows automaticly go up after lock is one of those two channels: ENG148616-IDE02022-ZV Komfort (Fensterheber)-Comfort opening ENG148616-ENG154964-ZV Komfort (Fensterheber)-BAP_Komfortschließen Thats what i found in my history Yeah there not channels in my 09 module (2017) or a 2019 module either fella, must be to do with the new modules in the polo top one is just central locking- (windows) comfort opening bottom one is central locking- (windows) BAP Convenient closing
|
|
|
Post by HamRdwn on Jan 17, 2020 21:59:53 GMT
Has anyone successfully coded their car so the outer tail lights flash when the hatch is open? I set it with my OBDeleven as a one-click app, but it doesn't seem to work.
Thanks much.
|
|
|
Post by ethenj on Jan 18, 2020 14:37:41 GMT
***Joker Taillights***
(Stage 1) Enable outer tail lights/running lights (Schlusslicht) as turn signals:
Leuchte23SL HLC10 (Outer SchlussLicht/running light, left):
*** Lichtfunktion B 23: nicht aktiv --> Blinken links Dunkelphase *** *** Lichtfunktion C 23: nicht aktiv --> Blinken links Hellphase *** *** Dimming Direction CD 23: maximize --> minimize ***
Leuchte24SL HRA65 (Outer SchlussLicht/running light, right): *** Lichtfunktion B 24: nicht aktiv --> Blinken rechts Dunkelphase *** *** Lichtfunktion C 24: nicht aktiv --> Blinken rechts Hellphase*** *** Dimming Direction CD 24: maximize --> minimize ***
(Stage 2) Enable inner tail lights/running lights (Schlusslicht) as turn signals
Leuchte16BLK SLB35 BLK SL KC9 (Inner tail light, right)
*** Lichtfunktion B 16: nicht aktiv --> Blinken rechts Dunkelphase *** *** Lichtfunktion C 16: nicht aktiv --> Blinken rechts Dunkelphase *** *** Dimming Direction CD 16: maximize --> minimize ***
Leuchte17TFL R BLK SRB3 TFL R BLK SR KC3 (Inner tail light, left)
*** Lichtfunktion B 17: nicht aktiv --> Blinken links Dunkelphase *** *** Lichtfunktion C 17: nicht aktiv --> Blinken links Dunkelphase *** *** Dimming Direction CD 17: maximize --> minimize ***
(Stage 3) Disable brake lights acting as turn signals:
Leuchte20BR LA71: Brake light, left:
*** Lichtfunktion B 20: Blinken links Hellphase --> nicht aktiv *** *** Lichtfunktion C 20: Blinken links Dunkelphase --> nicht aktiv *** *** Dimming Direction CD 20: minimize --> maximize ***
Leuchte21BR RC8: Brake light, right:
*** Lichtfunktion B 21: Blinken rechts Hellphase --> nicht aktiv *** *** Lichtfunktion C 21: Blinken rechts Dunkelphase --> nicht aktiv *** *** Dimming Direction CD 21: minimize --> maximize ***
|
|
|
Post by onur2006 on Jan 18, 2020 14:54:27 GMT
Yes ı did with one click app and it worked perfectly. (2018 Golf R )
|
|
|
Post by HamRdwn on Jan 18, 2020 16:04:50 GMT
Yes ı did with one click app and it worked perfectly. (2018 Golf R ) Hmm...
|
|
|
Post by rudy0725 on Jan 19, 2020 21:43:59 GMT
***Joker Taillights*** (Stage 1) Enable outer tail lights/running lights (Schlusslicht) as turn signals: Leuchte23SL HLC10 (Outer SchlussLicht/running light, left): *** Lichtfunktion B 23: nicht aktiv --> Blinken links Dunkelphase *** *** Lichtfunktion C 23: nicht aktiv --> Blinken links Hellphase *** *** Dimming Direction CD 23: maximize --> minimize *** Leuchte24SL HRA65 (Outer SchlussLicht/running light, right): *** Lichtfunktion B 24: nicht aktiv --> Blinken rechts Dunkelphase *** *** Lichtfunktion C 24: nicht aktiv --> Blinken rechts Hellphase*** *** Dimming Direction CD 24: maximize --> minimize *** (Stage 2) Enable inner tail lights/running lights (Schlusslicht) as turn signals Leuchte16BLK SLB35 BLK SL KC9 (Inner tail light, right) *** Lichtfunktion B 16: nicht aktiv --> Blinken rechts Dunkelphase *** *** Lichtfunktion C 16: nicht aktiv --> Blinken rechts Dunkelphase *** *** Dimming Direction CD 16: maximize --> minimize *** Leuchte17TFL R BLK SRB3 TFL R BLK SR KC3 (Inner tail light, left) *** Lichtfunktion B 17: nicht aktiv --> Blinken links Dunkelphase *** *** Lichtfunktion C 17: nicht aktiv --> Blinken links Dunkelphase *** *** Dimming Direction CD 17: maximize --> minimize *** (Stage 3) Disable brake lights acting as turn signals: Leuchte20BR LA71: Brake light, left: *** Lichtfunktion B 20: Blinken links Hellphase --> nicht aktiv *** *** Lichtfunktion C 20: Blinken links Dunkelphase --> nicht aktiv *** *** Dimming Direction CD 20: minimize --> maximize *** Leuchte21BR RC8: Brake light, right: *** Lichtfunktion B 21: Blinken rechts Hellphase --> nicht aktiv *** *** Lichtfunktion C 21: Blinken rechts Dunkelphase --> nicht aktiv *** *** Dimming Direction CD 21: minimize --> maximize *** Good evening, you have a video please. ? thank you
|
|
|
Post by kaluzu on Jan 20, 2020 1:48:32 GMT
In order for the Auto-Start/Stop to work you need to have the foot firmly depressing the brake. otherwise, when you release the brake, the engine starts, even though the Auto-Hold only the car.
Is there a tweak to have the Auto-Hold work with Auto-Stop/Start,meaning the engine turns off without holding the brake, once the car is stopped ?
|
|
|
Post by awd4416 on Jan 20, 2020 4:39:50 GMT
Finally got my 2019 GTI S LED light retrofit at 100% working state. Thanks a lot to vwjap, 2018gti, carolco and the rest of the community.
My 4B module had [Software version: 0345], that does not work on the Golf. I loaded [Software version: 0346] (as everything else failed) with VCP along with the parameters. Below is the final configuration.
Something I notice, if you don't have [Cornering lamp in operation: active], you will get a "Dynamic Cornering Light" error on startup if you activate any of the following; City Lights, Highway Lights, rain_lights, All-weather lights. *Remember to do Headlight Basic settings after
Installed hardware: mk7.5 LED headlights - Rear level sensor connected to the BCM
- No camera [not yet anyways]
- 4B module
Control unit: 4B Multifunction Module System description: FCM MQB Low Software number: 3Q0907338C Software version: 0346 Hardware number: 3Q0907338C Hardware version: 002 Serial number: 07101810522906 ODX name: EV_MultiModulContiVW48X ODX version: 002006 Long coding: 000000050900134A0110BEE0C20000000000000000000000000000000000 Adaptations: Activating and deactivating all development messages: ---: not active Presentation mode: ---: not active Activate left/right hand drive switch-over: ---: not active Presentation run dynamic AFS light: ---: active Adaptive light functions: ---: active Matrix light, total dimming: ---: 100.8 % Matrix headlamp, function at standstill: ---: not active Bit pattern of individual segment activation, left headlight: LED 1: Off LED 2: Off LED 3: Off LED 4: Off LED 5: Off LED 6: Off LED 7: Off LED 8: Off LED 9: Off LED 10: Off LED 11: Off LED 12: Off LED 13: Off LED 14: Off LED 15: Off LED 16: Off LED 17: Off LED 18: Off LED 19: Off LED 20: Off LED 21: Off LED 22: Off LED 23: Off LED 24: Off LED 25: Off LED 26: Off LED 27: Off LED 28: Off LED 29: Off LED 30: Off LED 31: Off LED 32: Off LED 33: Off LED 34: Off LED 35: Off LED 36: Off LED 37: Off LED 38: Off LED 39: Off LED 40: Off LED 41: Off LED 42: Off LED 43: Off LED 44: Off LED 45: Off LED 46: Off LED 47: Off LED 48: Off LED 49: Off LED 50: Off LED 51: Off LED 52: Off LED 53: Off LED 54: Off LED 55: Off LED 56: Off LED 57: Off LED 58: Off LED 59: Off LED 60: Off LED 61: Off LED 62: Off LED 63: Off LED 64: Off LED 65: Off LED 66: Off LED 67: Off LED 68: Off LED 69: Off LED 70: Off LED 71: Off LED 72: Off LED 73: Off LED 74: Off LED 75: Off LED 76: Off LED 77: Off LED 78: Off LED 79: Off LED 80: Off LED 81: Off LED 82: Off LED 83: Off LED 84: Off LED 85: Off LED 86: Off LED 87: Off LED 88: Off LED 89: Off LED 90: Off Bit pattern of individual segment activation, right headlight: LED 1: Off LED 2: Off LED 3: Off LED 4: Off LED 5: Off LED 6: Off LED 7: Off LED 8: Off LED 9: Off LED 10: Off LED 11: Off LED 12: Off LED 13: Off LED 14: Off LED 15: Off LED 16: Off LED 17: Off LED 18: Off LED 19: Off LED 20: Off LED 21: Off LED 22: Off LED 23: Off LED 24: Off LED 25: Off LED 26: Off LED 27: Off LED 28: Off LED 29: Off LED 30: Off LED 31: Off LED 32: Off LED 33: Off LED 34: Off LED 35: Off LED 36: Off LED 37: Off LED 38: Off LED 39: Off LED 40: Off LED 41: Off LED 42: Off LED 43: Off LED 44: Off LED 45: Off LED 46: Off LED 47: Off LED 48: Off LED 49: Off LED 50: Off LED 51: Off LED 52: Off LED 53: Off LED 54: Off LED 55: Off LED 56: Off LED 57: Off LED 58: Off LED 59: Off LED 60: Off LED 61: Off LED 62: Off LED 63: Off LED 64: Off LED 65: Off LED 66: Off LED 67: Off LED 68: Off LED 69: Off LED 70: Off LED 71: Off LED 72: Off LED 73: Off LED 74: Off LED 75: Off LED 76: Off LED 77: Off LED 78: Off LED 79: Off LED 80: Off LED 81: Off LED 82: Off LED 83: Off LED 84: Off LED 85: Off LED 86: Off LED 87: Off LED 88: Off LED 89: Off LED 90: Off Production mode: Deactivate left-/right hand driving switch-over: not active Deactivate production mode: ---: Deactivating Reference_Run_Start_Condition: ---: Engine start Reference_Run_Activation_Effect: par_Reference_Run_Activation_Effect: Activation effect disabled Order_Reference_Run_Activation_Effect: par_Order_Reference_Run_Activation_Effect: No dependency Installation list, specified installations: Multifunction Module: Yes Multifunction module on the second bus connection: Yes Light Control Left: Yes Light Control Right: Yes Light Control Left 2: Yes Light Control Right 2: Yes Antenna Control Module: No Telematics Communication Unit: No Headlights left, low beam segment actuation: LED 1: Off LED 2: Off LED 3: Off LED 4: Off LED 5: Off LED 6: Off LED 7: Off LED 8: Off LED 9: Off LED 10: Off LED 11: Off LED 12: Off LED 13: Off LED 14: Off LED 15: Off LED 16: Off LED 17: Off LED 18: Off LED 19: Off LED 20: Off Headlights right, low beam segment actuation: LED 1: Off LED 2: Off LED 3: Off LED 4: Off LED 5: Off LED 6: Off LED 7: Off LED 8: Off LED 9: Off LED 10: Off LED 11: Off LED 12: Off LED 13: Off LED 14: Off LED 15: Off LED 16: Off LED 17: Off LED 18: Off LED 19: Off LED 20: Off Matrix head lamps, steering angle: ---: 9600.00 ° Cornering lamp in operation: Status: active Advanced identification: Number of programming attempts: Application: 6 Bootloader: 0 Number of parameterization attempts: Data record: 4 Number of successful parameterization attempts: Data record: 4 Maximum number of possible update programming: Application: 65535 Bootloader: 65535 Identification of bus master/sub bus master: ECU ID: 4b ECU Name: Multifunction Module LOGICAL-LINK SHORT-NAME: Multifunction Module Identification of connected components: ID number: 4b subsystem_name: Multifunction Module Bus message/node address: a9 Workshop code and date of last update programming of SW module: Year: 0 Month: 1 Day: 1 Device number: 0 Importer number: 0 Dealership number: 0 Programming status: Correct result Year: 20 Month: 1 Day: 19 Device number: 12313 Importer number: 3 Dealership number: 12289 Programming status: Correct result Date of last coding: Year: 20 Month: 1 Day: 19 FAZIT-identification: Manufacture location index: SJ8-FST Day of manufacture: 07.10.18 Manufacturer- test stand number: 1052 Running manufacturer number: 2906 Identification of parameterization: Number of data records: 16 Data set AFS: ME MXB data set: -- Diagnostic mode: ---: VW - diagnostic mode VW/Audi part number: ---: 3Q0907338C SoftwareVersion: ---: 0346 Serial number: ---: 07101810522906 Hardware part number: ---: 3Q0907338C Software version for suppliers: ---: FFFF1112201814123400000000000000 System description: ---: FCM MQB Low Adaptation workshop code: Device number: 60933 Importer number: 3 Dealership number: 12289 Date of last adaptation: Year: 20 Month: 1 Day: 19 ASAM/ODX file identification: ---: EV_MultiModulContiVW48X Parameter set part number: ---: ----------- Parameter set version: ---: ---- ASAM/ODX file version: ---: 002006 HardwareVersion: ---: 002 Vehicle equipment code: ---: 000000000000000000000000 Coding workshop code: Device number: 60933 Importer number: 3 Dealership number: 12289 Parameterization workshop code: Device number: 12313 Importer number: 3 Dealership number: 12289 Parameterization date: Year: 20 Month: 1 Day: 19 System abbreviation: ---: J745 Versions of software module: Application: 0346 Bootloader: 0108 AUTOSAR Standard application software identification: Standard software module: Diagnostics - Event - Handler Software manufacturer ID: IAV GmbH Primary version number: 2 Secondary version number: 3 Revision number: 3 ---: Unknown Software manufacturer ID: In2Soft GmbH Primary version number: 1 Secondary version number: 0 Revision number: 3 Standard software module: ISO15765-2 Software manufacturer ID: In2Soft GmbH Primary version number: 2 Secondary version number: 0 Revision number: 5 Standard software module: Standard diagnostic services for UDS Software manufacturer ID: In2Soft GmbH Primary version number: 2 Secondary version number: 2 Revision number: 8 Standard software module: UDS - protocol Software manufacturer ID: In2Soft GmbH Primary version number: 2 Secondary version number: 1 Revision number: 16 Standard software module: OSEK - Network management Software manufacturer ID: Vector Informatik GmbH Primary version number: 2 Secondary version number: 2 Revision number: 0 Flash data security: Hash value: Not available Key enable mechanism: Not available Key: No Key type: Series Project ID: 00000580 Hash value: Programmability status: Programmability: programmable Program consistency: Program present Consistency of EEPROM-data: Error during last data record download: no error Data consistency: valid EEPROM data Data record modification: Data record not changed Parameterizability: Parameterizable Known subsystems: Subsystem designation: Reserved segment_number: 0 subsystem_present: No subsystem_coded: No reserved_(VW_80127_3.0): 0 Subsystem number: 0 Subsystem designation: Reserved segment_number: 0 subsystem_present: No subsystem_coded: No reserved_(VW_80127_3.0): 0 Subsystem number: 0 Subsystem designation: Reserved segment_number: 0 subsystem_present: No subsystem_coded: No reserved_(VW_80127_3.0): 0 Subsystem number: 0 Subsystem designation: Reserved segment_number: 0 subsystem_present: No subsystem_coded: No reserved_(VW_80127_3.0): 0 Subsystem number: 0 Subssystem diagnosis classes: Systems diagnosis class 3: Yes Systems diagnosis class 2/2F: Yes Systems diagnosis class 1: Yes Systems diagnosis class 0: No
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 109
|
Post by 2018gti on Jan 21, 2020 3:32:13 GMT
awd4416 That is huge!! Great work! I’m sure it wasn’t easy. I’ve never heard of anyone pulling off this retrofit. Now you can start a retrofit service for S-model Golfs
|
|
fastdub
New Member
2018 GTi Autobahn mk7.5
Posts: 7
|
Post by fastdub on Jan 26, 2020 4:09:01 GMT
My buddy Ethan just released this on Reddit I think you guys should submit this coding to be an app in OBDEleven for the mk7.5 GTi . Make sure it's all strait and give the mk7.5'ers the same treatment the 7's get thanx
EthenCarries7d Joker Taillights with Obdeleven. Have yet to find this ANYWHERE, so here you all are. Enjoy!
(Stage 1) Enable outer tail lights/running lights (Schlusslicht) as turn signals:
Leuchte23SL HLC10 (Outer SchlussLicht/running light, left):
*** Lichtfunktion B 23: nicht aktiv --> Blinken links Dunkelphase ***
*** Lichtfunktion C 23: nicht aktiv --> Blinken links Hellphase ***
*** Dimming Direction CD 23: maximize --> minimize ***
Leuchte24SL HRA65 (Outer SchlussLicht/running light, right):
*** Lichtfunktion B 24: nicht aktiv --> Blinken rechts Dunkelphase ***
*** Lichtfunktion C 24: nicht aktiv --> Blinken rechts Hellphase***
*** Dimming Direction CD 24: maximize
|
|
|
Post by summons on Jan 26, 2020 19:22:11 GMT
Re the Urban Joke turn signals...
Thank you Ethan!!!
Works great on my '18 R except for a fault in the central electrics module: U101400
I am unsure of the impact or reason in the "Urban Joke" coding that might cause the fault... Regards, Eric
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 109
|
Post by 2018gti on Jan 27, 2020 1:22:24 GMT
My buddy Ethan just released this on Reddit I think you guys should submit this coding to be an app in OBDEleven for the mk7.5 GTi . Make sure it's all strait and give the mk7.5'ers the same treatment the 7's get thanx EthenCarries7d Joker Taillights with Obdeleven. Have yet to find this ANYWHERE, so here you all are. Enjoy! (Stage 1) Enable outer tail lights/running lights (Schlusslicht) as turn signals: Leuchte23SL HLC10 (Outer SchlussLicht/running light, left): *** Lichtfunktion B 23: nicht aktiv --> Blinken links Dunkelphase *** *** Lichtfunktion C 23: nicht aktiv --> Blinken links Hellphase *** *** Dimming Direction CD 23: maximize --> minimize *** Leuchte24SL HRA65 (Outer SchlussLicht/running light, right): *** Lichtfunktion B 24: nicht aktiv --> Blinken rechts Dunkelphase *** *** Lichtfunktion C 24: nicht aktiv --> Blinken rechts Hellphase*** *** Dimming Direction CD 24: maximize This is a cool tweak but the problem is you can barely see the running lights when it’s sunny out. The coding is a variation of the one I made a while ago but reversed it because of that. www.reddit.com/r/GolfGTI/comments/a910bh/euro_taillight_mod/
|
|
|
Post by tengo83 on Jan 28, 2020 16:02:01 GMT
Hi Guys,
I am new here and need your help directly.
have a mistake with me blind spot is not.
Thanks Regards Sergio
|
|
|
Post by tengo83 on Jan 28, 2020 18:35:28 GMT
|
|
|
Post by gtifanatic on Jan 31, 2020 21:05:22 GMT
hi
i broke my polo (same like golf, so thats why i send message here)
i have:
Steuergerät: 17 Schalttafeleinsatz Aktive Fehler: 0 Inaktive Fehler: 1 Systembeschreibung: KOMBI Software-Nummer: 2G0920790 Software-Version: 0620 Hardware-Nummer: 2G0920790 Hardware-Version: 514 ODX Name: EV_DashBoardVDDMQBA0 ODX Version: 001029 Fehler: B200049 - Steuergerät defekt statisch
Kilometerstand: 35355 km Datum: 2020-01-28 23:07
i think i need a new virtual cockpit
or can somebody help me?
|
|
|
Post by dv52 (Australia) on Feb 1, 2020 0:55:33 GMT
^^^^gtifanatic. Hi.
It's very unlikely that a new cockpit unit is required - but a few more details would help in the forum's understanding of the problem.
Simply saying "I broke my polo" and posting -up the error message (which is generic for many DTCs) is a tad limiting IMO. Much better to help yourself, by helping us understand what resulted in your "broken polo" (i.e. how did it get this way?)
Don
|
|
|
Post by gtifanatic on Feb 1, 2020 6:31:19 GMT
I had done some adaptions and longcodings in past november Now i received this warning We already went to stock with all adaptions and longcodings, but this wont work
They module 17 keeps giving this warning
I think it came because i tried to use the one click app for vim But at this radio is no vim And i think the script/app changed some codings which causing this error Its highly possible the eeprom in broken
|
|
|
Post by Carolco on Feb 1, 2020 12:02:22 GMT
Hello tengo83.
Two fauls. In unit park assist and 3C.
did you touch something in this units?
|
|
|
Post by tigeo on Mar 8, 2020 13:03:59 GMT
|
|
|
Post by royb95 on Mar 10, 2020 9:09:48 GMT
i have an E-Golf 2020 with Active Info Display, i tried the 10 color multi color change through OBDeleven but it failed. Now i tried the 30 color but this also failed, after i wanted to return it to "Original" the middle part of the AID stays grey instead of the original blue.
i did an full backup, but it seems it didn't backup the 09 central electronics,
hopefully someone has the solution
|
|
|
Post by vwjap on Mar 10, 2020 9:20:55 GMT
Have you got pro?
|
|