Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 15, 2018 8:21:19 GMT
can you please share the coding for the other audi users.
|
|
gevan
New Member
Posts: 4
|
Post by gevan on Jul 20, 2018 21:11:03 GMT
Hi everyone, after reading on this forum and posts, I didn't find how 'dectivate daylight (DRL) in rear. LED drivers'.
My car is Seat Leon Cupra '18 and I'm living in Mexico, so I want turn off the rear lights and only keep working the front DRL, as before the facelift models do.
I read the instructions at top of this post and the option is off or invalidate (don't remember exactly how it appears), so I understand the lights must be off but not, they are on.
I appreciate your guide to apply it on my car.
|
|
gevan
New Member
Posts: 4
|
Post by gevan on Jul 21, 2018 23:06:40 GMT
Gaven I mean need go to 09 cent elect. Leuchte 23,24,26,27 or whatever four is for rear tailgate and on D unpin front DRL. This connect to rear work with front. I wana do that too. Because new modules dont have long coding and all doing like that not like easy way. 21. Turning off rear tailgate DRL on daylight (like old leons have or bmw etc...) Module 09 – Electronic. Code (31347) Adaptation Leucthe23SL HLC10 Lichtfunktion D 23 -> not activate. Default Tagfahrlicht Leucthe24SL HRA65 Lichtfunktion D 24 -> not activate. Default Tagfahrlicht Leucthe26NSL LA72 Lichtfunktion D 26 -> not activate. Default Tagfahrlicht Leucthe27NSL RC6 Lichtfunktion D 27 -> not activate. Default Tagfahrlicht Thanks friend, I'll do it this weekend and I'll let you know if it worked. EDIT: It worked, thank you so much irtasuo
|
|
|
Post by epsilon on Jul 29, 2018 12:48:52 GMT
it works only with the old sensor.you have the new sensor. How do I determine which sensor I have in 2018 FR ST?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 6, 2018 10:48:00 GMT
Not tried this as i dont have a facelift car but on the Golf forum a car with kessy shows the following coding as working - please update to confirm AUTOMATIC REPLACEMENT OF REAR VIEW MIRRORS (includes deploying rear-view mirrors with ignition / contact button) Go to Module 09 Electronic control unit Select Adaptitions Select Spiegelverstellung
Select Funk Spiegelanklappung Modus and set value to "by look command via remote control key" Select Funk Spiegelanklappen, set value "On" Select Menusteuerung Funk Spiegel anklappen, set value to "Activated" If you want them to be displayed when the contact is pressed, instead of when opening the control / door (Thanks to HandyMan)In Signalisierung_Spiegelanklappung, set value "Not Activated" Confirm, code 31347
Had confirmation on 2018 car with Kessy this works.
|
|
|
Post by acid888 on Aug 13, 2018 19:03:43 GMT
Hey guys,
i want to deactivate the side Airbags in my leon 5f Cupra 290. but i get ever the notice „31 function Not available“ i think i Need another accesscode??
Or anyone know the bytes in long Coding for the right And left side Airbag?
I Hope someone can help me, sry for bad English.
|
|
|
Post by luis1986 on Aug 17, 2018 16:40:52 GMT
|
|
|
Post by luis1986 on Aug 17, 2018 16:42:48 GMT
Hey!
I want to activat rain closing but i dont have access control and i have RLHS
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 17, 2018 21:12:30 GMT
luis1986 try ZV Komfort: Just a hint to everybody as VAG keep chaning code if you cant find the first code in the list (eg Access Control or Access Control 2) then try the next level down you will often find what you are looking for there.
|
|
|
Post by serpicus on Aug 22, 2018 18:13:55 GMT
Free alarm on Seat Leon 2017 FR facelift works Module 09 (Central Electrics) Security access -> 31347 Extended coding (bytes) - Byte 12 -> Activate Bit 0 (Anti-theft system installed / active) Adaptation Submenu - Anti-theft device - DWA Alarmverzoegerung -> Driver door contact thatcham - DWA Camper Modus -> active - Ueberwachung Innenentriegelungshelbel -> active - Akustischer Alarm Signalhorn -> active - Diebstahlwarnanlage -> active Adaptation Submenu - Acknowledgement Signals - Akustische Rueckmeldung global -> active - Akustische Rueckmeldung Signalhorn -> active
|
|
|
Post by kikihr on Aug 23, 2018 12:19:51 GMT
Hey! I want to activat rain closing but i dont have access control and i have RLHS Rain closing not possible with RLHS sensor.
|
|
|
Post by serpicus on Aug 26, 2018 13:58:56 GMT
Hi, I need your help.
I have a SEAT LLEON FR 2017 facelift with lane assist and sign assist, but it hasn't the High Beam Assist.
The car has the halogen beam so, is the following coding process correct for the HBA activation?
Controller 09 - Central Electrics
Security Access 31347
Adaptations
- Menusteuerung Fernlichtassistent Werkeinstellung: Set to PRESENT
- Menusteuerung Fernlichtassistent: Set to PRESENT
- Erwiterte Fernlichtsteuerung: Set to AFS: FLA: FERNLICHT UEBER AFS
Menu option for "Light Assist" should be available in the Lights section of the Car settings menu (may require a factory reset of Light menu).
Controller A5 - Front Sensor
Coding
-Byte 21, Bit 5-7 (20 AFS_coding_Light_Assist,High_Beam_Assist)
Thanks
|
|
|
Post by alicenir on Sept 8, 2018 5:39:12 GMT
Hi My first post here. is there an option for coding the fan speed to automatically lower the speed when you receive a phone call or dial a number in case the fan speed is high? i know that Audi A3 has this option..
|
|
|
Post by jedreg on Dec 12, 2018 22:20:01 GMT
If you want them to be displayed when the contact is pressed, instead of when opening the control / door (Thanks to HandyMan)In Signalisierung_Spiegelanklappung, set value "Not Activated" Here comes my issue. Cupra 300 ST 4drive, model year 2019, with kessy. Default mirror folding is on each lock/unlock sequence, annoying. I tried to delay unfloding moment till ignition button pressed - unsuccessfully. All settings are as mentioned by cupra280. Looks like option is ignored and mirrors behave as before. Other adaptations I applied works fine, this one though is pain in the back. Any ideas?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 13, 2018 12:26:43 GMT
jedreg have you tried doing a factory reset on your info unit that sometimes makes stuff work that did not work after the coding.
|
|
|
Post by sebastiano on Dec 17, 2018 19:38:05 GMT
Menù off-road 5f
|
|
|
Post by jannick94 on Dec 18, 2018 7:17:01 GMT
Hey, is There any mods for the virtuelt cockpit yet? I Wanna do, carbon background, sport gauges, og anything like that?
|
|
|
Post by narkotiko on Dec 21, 2018 8:30:16 GMT
Hi guys, Is there or is it possible to facelift the code while changing the driving mode in this case to Cupra mode and change the interior lights to red? Someone can help me?
Thanks
|
|
adem
New Member
Posts: 19
|
Post by adem on Jan 7, 2019 0:17:57 GMT
Hi For Leon 2018. how to active GPS ( maps ) In Dashbored and radio mmi ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 15, 2019 22:44:46 GMT
Thanks to maypack on the seatcupra forum Anyone get annoyed with the warning message telling you to turn off your foglights it can be coded out. On the facelift Leon's Under Control Module 09 Adaptations Aussenlicht_Heck (Translates to: Exterior Rear Light) Nebelschlusslicht_Warngeschwindigkeit (Translates to: Rear Fog Warning Speed) Currently states 60km/hr Change to value you wish between 0-255. Confirm by Green Tick
|
|
shugy
New Member
Posts: 4
|
Post by shugy on Jan 23, 2019 23:27:31 GMT
Hi Is there a way to make interior lights turn on when i stop the engine, not after a door is open?
|
|
|
Post by leonidr on Jan 27, 2019 17:13:26 GMT
Hey, Did somebody found coding or adaptation for the virtual cockpit ? Or maybe someone can help with this if I publish some info from my car ? Thanks guys
|
|
|
Post by ayal1991 on Jan 28, 2019 21:22:06 GMT
Hello,
New here. driving a 2018 cupra, and want to code US-lights for it.
Anyone having a guide for it using OBDeleven?
Thanks for all replies
|
|
|
Post by copii92 on Feb 22, 2019 3:05:49 GMT
Se podrían apagar la parte superior de DRL traseros en el modo sport? Estilo audi?
|
|
|
Post by felix240 on Apr 2, 2019 20:07:41 GMT
Hello, one smal question: I want DLR and fog lamps ON. But: the Fog lamps should Be only dimm / glow with 50% of brigtness. Is this possible? Many thanks to the Community for the anwser
|
|
mudja
New Member
Posts: 2
|
Post by mudja on Apr 4, 2019 15:07:30 GMT
following
|
|
mudja
New Member
Posts: 2
|
Post by mudja on Apr 4, 2019 15:42:33 GMT
Where can i find the " N thread"? Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 4, 2019 18:15:18 GMT
Pardon my ignorance what is the N model.
|
|
|
Post by oliviertfe on Apr 28, 2019 5:54:01 GMT
I want to disable the ACT system (2 cylinders mode) on my Leon MY2019 1.5L TSI 150 ACT. It's possible with OBD eleven PRO?
After watching in OBD Eleven PRO, I think it's not possible (?), but i prefer to ask!
I do not like this system for long-term engine reliability.
|
|
shugy
New Member
Posts: 4
|
Post by shugy on May 22, 2019 14:25:18 GMT
Anybody manage to activate driver personalization? I've done something but is not complete. Just introducing names, and select driver, cant select any options.
|
|